X-1b installd !! (the happy thread)

Page: < 123 > Showing page 2 of 3
Author
Middleman
Max Output Level: -31.5 dBFS
  • Total Posts : 4397
  • Joined: 2003/12/04 00:58:50
  • Location: Orange County, CA
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/21 23:49:25 (permalink)
I am home.

Gear: A bunch of stuff.
#31
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/21 23:55:39 (permalink)

> P5Q vs P5Qc, think it's just luck :) cheers
#32
deswind
Max Output Level: -71 dBFS
  • Total Posts : 952
  • Joined: 2003/11/23 14:07:13
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:11:16 (permalink)
Do any of you think it is lower latency than 8.5.3 or probably equal ???  (either way still happy - so I hope this can be in a happy thread!)
#33
Shadow of The Wind
Max Output Level: -82 dBFS
  • Total Posts : 425
  • Joined: 2005/06/09 17:39:20
  • Location: Mountain View, CA (German)
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:26:03 (permalink)
It even sounds better...
Just kidding...

Wilko
#34
David A. Batson
Max Output Level: -86 dBFS
  • Total Posts : 203
  • Joined: 2007/12/05 12:06:40
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:26:59 (permalink)
I am happy with it!! No Problems so far!!
#35
Cody
Max Output Level: -87 dBFS
  • Total Posts : 169
  • Joined: 2003/11/06 14:58:40
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:29:22 (permalink)
There's a bug that's been in Sonar for the past few versions that's gone now. When working in the piano roll view, if you were deleting an extra note that was close to another, it would erase parts of the surrounding notes. No so in X1b!!!! It works flawlessly now.
#36
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:35:09 (permalink)

> Most will be very pleased, right off the batt im seeing just what
    I payd for +++ I knew it be a hard start, but the end results..
    32nd shots on the space bar . 0error, durm roll anyone !!!
#37
george4th
Max Output Level: -88 dBFS
  • Total Posts : 105
  • Joined: 2005/05/06 00:41:05
  • Location: Lafayette, LA
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 00:59:53 (permalink)
I waited and waited for this, was still on 8.5.3, and was afraid, especially with the lynx thing...bought it installed it today and it works flawlessly for me....I am happy;)

X1b PE, Sonar 8.5.3 PE 64bit...Amd Phenom II quad core processor 12gb ram,1tb hd & 500g hd, W7 64bit, Lynx AES16, (2) Apogee Rosetta 800's,Focal Twin6be's,M-Audio Midisport 4x4(64 bit driver), Mackie Control Universal Pro ++,Yamaha 01v96, All Rode mic's manufactered to date, alot of Shure mics,Yamaha XS8, Alesis QS8.1, Kurzweil k2000rs, Yamaha Motif es76, Kurzweil pc88, Roland XV-3080, Way too many guitars, a multitude of outboard processors,Yamaha C1 piano, Bach Strad, Yamaha Xeno, Yamaha 731 Flugel
#38
M@ B
Max Output Level: -68 dBFS
  • Total Posts : 1128
  • Joined: 2010/01/05 20:54:54
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 02:09:13 (permalink)

#39
deswind
Max Output Level: -71 dBFS
  • Total Posts : 952
  • Joined: 2003/11/23 14:07:13
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 02:54:37 (permalink)
george4th


I waited and waited for this, was still on 8.5.3, and was afraid, especially with the lynx thing...bought it installed it today and it works flawlessly for me....I am happy;)

I am using a Lynx AES 16e card.   Did you notice any difference in latency from 8.5.3. ?
Did you uninstall 8.5.3 ?
THANKS,
AB
#40
shawn@trustmedia.tv
Max Output Level: -54 dBFS
  • Total Posts : 2136
  • Joined: 2008/12/06 09:41:18
  • Location: Hastings, MN
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 03:05:37 (permalink)
Loaded up a 25 tracker full of effects and vsts no problems from x1a-b, but I had very few problems with x1a....

Studio SONAR X3. Axiom 25 midi controller, DUNE 2, Producer Content, Good Times, Bandlab Mojo

#41
mudgel
Max Output Level: 0 dBFS
  • Total Posts : 12010
  • Joined: 2004/08/13 00:56:05
  • Location: Linton Victoria (Near Ballarat)
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 03:53:54 (permalink)
Afterinstalling X1b this is the first time X1 has run longer than about 10 minutes. Yay!.

1 crash so far. Playing back, stopped play, changed focus and SONAR disappeared. haven't been able to repeat so far.

When I change focus to another window the Control Bar still disappears like it has since X1 first released.

Mixed feelings. Certainly better than before whether that will be good enough I don't know. Lot's more experiments to do.

Mike V. (MUDGEL)

STUDIO: Win 10 Pro x64, SPlat & CbB x64,
PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
Monitors: Adam A7X, JBL 10” Sub.
Audio I/O & DSP Server: DIGIGRID IOS & IOX.
Screen: Raven MTi + 43" HD 4K TV Monitor.
Keyboard Controller: Native Instruments Komplete Kontrol S88.
#42
Freddie H
Max Output Level: -39 dBFS
  • Total Posts : 3617
  • Joined: 2007/09/21 06:07:40
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 04:00:49 (permalink)
First impression:

* Better and Tighter AUDIO and MIDI.

* GUI works much better and much faster and responsive. ScreenSets

* MAP BUG Fixed. Track view window doesn't scroll randomly anymore.

* SNAP work again

* Quantize in AUDIO SNAP work.

* Pro Channel work. ON OFF button

* Re-organize tracks in busses "ALT+drag" in Console work.

* Disable "Show MIDI-tracks" in Console work again and remember the status.
 
and many other bugs fixed...etc


Numerous important issues and vail functions are FIXED. Yes I'm very Happy!!
post edited by Freddie H - 2011/03/22 04:03:00


-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
#43
george4th
Max Output Level: -88 dBFS
  • Total Posts : 105
  • Joined: 2005/05/06 00:41:05
  • Location: Lafayette, LA
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 16:28:01 (permalink)
deswind, I did not uninstall 8.5.3 yet, I always leave the old version on for a while.  If anything I have seen improved performance with my lynx card, not by much, but an improvement none the less.  I am using the regular PCI version, not the express, if that makes any difference.  You have updated the firmware and software from lynx right?
G

X1b PE, Sonar 8.5.3 PE 64bit...Amd Phenom II quad core processor 12gb ram,1tb hd & 500g hd, W7 64bit, Lynx AES16, (2) Apogee Rosetta 800's,Focal Twin6be's,M-Audio Midisport 4x4(64 bit driver), Mackie Control Universal Pro ++,Yamaha 01v96, All Rode mic's manufactered to date, alot of Shure mics,Yamaha XS8, Alesis QS8.1, Kurzweil k2000rs, Yamaha Motif es76, Kurzweil pc88, Roland XV-3080, Way too many guitars, a multitude of outboard processors,Yamaha C1 piano, Bach Strad, Yamaha Xeno, Yamaha 731 Flugel
#44
daryl1968
Max Output Level: 0 dBFS
  • Total Posts : 10984
  • Joined: 2010/06/01 22:51:43
  • Location: Englishman in deepest, darkest Wales
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 17:04:35 (permalink)
Happy here - and have been since X1a - I can't help wondering if the people complaining are trying to run X1 on a ZX Spectrum.

#45
donbelisle
Max Output Level: -86 dBFS
  • Total Posts : 245
  • Joined: 2006/09/14 00:53:13
  • Location: Wichita, Ks
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 17:33:59 (permalink)
Since yesterday on my win XP 32bit and win 7 64bit, running 48 tracks audio, 12 midi tracks.
Ozone 4 and Alloy and V-Vocal, melodyne, pro channel, and many other effects scattered through out the mix.
Looped flawlessly 4 hours on both machines, using only 2 gig of ram on either machine. Track automation for volume and panning were on all channels.
Even "beatscape" did not glitch!
This was a simple loop test, I did not do major editing of tweaking parameters in real time. But audio playback and sync were excellent and over the 4 hour loop session, flawless operation on both Xp 32bit and win 7 64bit. I also used Ben`s and Panup`s tools. ( very grateful to both! )
I feel the audio engine`s stability is top notch.

 I did some real time editing till late into the night, no issues!
I favor those "narrow strips". With a large mix, it is a must have.

I never tried screen sets till last night, love em now!
I am overall quite pleased with things, thanks to everyone`s input here.
Cakewalk has been listening. As always, I would have like more fixes, but this is a wonderful patch update.

Don Belisle Sonar X1b, 8.5.3
-----------------------------------------------------
2 Q6600, Quadcores, XP pro 32bit, Win7 64 bit, 2gig mem, Motu MKIII, M-audio fast track ultra, Dynaudio monitors, M-audio BX8s, AV40s, Motif racks ES, 88-graded hammer keys, PRS, Fender, Ibanez, guitars, percussion pads, korg nano stuff, lots of other stuff.

#46
rodhuerta
Max Output Level: -90 dBFS
  • Total Posts : 15
  • Joined: 2008/01/18 18:20:18
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 17:47:29 (permalink)
I Haven't installed it on my main PC yet, but in my laptop seems to work very nice, all my major complaints seem to be solved now. Very happy. Thank you. 
post edited by rodhuerta - 2011/03/22 18:09:05
#47
Dave Modisette
Max Output Level: 0 dBFS
  • Total Posts : 11050
  • Joined: 2003/11/13 22:12:55
  • Location: Brandon, Florida
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 17:52:23 (permalink)
panup


StarTekh


> snicker all 3 tracks: panup thanks for your work in ..
back, id hoped a deal woulda been cut between you
and cakewalk so we could see the updates in the X-1b
patch...
X1b mods are online only hours after X1b patch...  no deal needed :)
I knew if I opened up this thread, I could find my happy thought.
 
Now, I can go on with my day. 

Dave Modisette ... rocks a Purrrfect Audio Studio Pro rig.

http://www.gatortraks.com 
My music.
... And of course, the Facebook page. 
#48
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 19:10:59 (permalink)

 Im Very Pleased !! and the (Happy Thread) is just what we need'd
 everyone keep up the good work !!
#49
deswind
Max Output Level: -71 dBFS
  • Total Posts : 952
  • Joined: 2003/11/23 14:07:13
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 21:19:34 (permalink)
george4th


deswind, I did not uninstall 8.5.3 yet, I always leave the old version on for a while.  If anything I have seen improved performance with my lynx card, not by much, but an improvement none the less.  I am using the regular PCI version, not the express, if that makes any difference.  You have updated the firmware and software from lynx right?
G
Thanks George for your response.   I have the PCI-E card with the latest firmware and driver.  8.5.3 runs well.  I guess I will take the plunge soon for X1B, though I wish I could do it all in one download.
 
Best,
AB
#50
Big E
Max Output Level: -90 dBFS
  • Total Posts : 13
  • Joined: 2009/11/30 09:45:19
  • Location: Akron, OH
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 21:50:31 (permalink)
So far, so good...
 
Tested X1b on a couple monster projects that are plug-in city and no crashes... yet. BitBridge would barf at random through X1 & X1a. Haven't gotten into the MIDI editing yet where I do about half my work. Hopefully all's well there, also.
 
Happy so far.

Big E

Sonar X1b
Hackintosh:
Windows 7 Pro x64
i7-920, Asus P6T Delue V2  
12 GB DDR3-1333
Echo Mia w/Vista x64 drivers
MOTU Micro Lite
Bunch o' other stuff
#51
John
Forum Host
  • Total Posts : 30467
  • Joined: 2003/11/06 11:53:17
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 21:58:24 (permalink)
For me outside the few bugs I found which were minimal in their impact I don't see a huge difference in the B patch and the A patch. I do like the redone CV narrow strips. But I wasn't one that had any real problems as it was. Not that I don't want the new patch.

I was hoping for some customization ability and perhaps a new feature but I'll take what I am given here. I think CW did a great job on this patch.

Best
John
#52
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:18:01 (permalink)
im still using x1a..after reading much of the problems here im afraid to update..its already downloaded to my download files..i just haven executed it..this is why..im running very good with x1a though i want these new features like the autosnap fix and the sonitus delay leak and many more..but what im worried about is if i install it and i have problems i cant just rool back can i??i need to do a complete reinstall..well i downloaded x1 from the cakewalk store..all 8 hours of downloading it..im not doing that again.is there a way to just remove the patch if it doesnt help or make things a mess??a system restore wont do it (another user told me)

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#53
ShermanSmelville
Max Output Level: -89 dBFS
  • Total Posts : 80
  • Joined: 2010/12/22 14:44:53
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:19:40 (permalink)
Hey Charlie....

Grow some balls and install it! You know you want to...


Edit: for "balls" read "confidence".
post edited by ShermanSmelville - 2011/03/22 22:31:40
#54
chuckebaby
Max Output Level: 0 dBFS
  • Total Posts : 13146
  • Joined: 2011/01/04 14:55:28
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:28:32 (permalink)
ShermanSmelville


Hey Charlie....

Grow some balls and install it! You know you want to...


under normal conditions id think you were a loser..but the truth hurts...your right.

Windows 8.1 X64 Sonar Platinum x64
Custom built: Asrock z97 1150 - Intel I7 4790k - 16GB corsair DDR3 1600 - PNY SSD 220GB
Focusrite Saffire 18I8 - Mackie Control
   
#55
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:28:34 (permalink)
ShermanSmelville


Hey Charlie....

Grow some balls and install it! You know you want to...


> Do keep in mind this is a Happy Thread> sir !!!
#56
ShermanSmelville
Max Output Level: -89 dBFS
  • Total Posts : 80
  • Joined: 2010/12/22 14:44:53
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:30:12 (permalink)
Sorry StarTekh and Charlie,

I didn't mean it in a bad way!  
#57
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:32:01 (permalink)

> John Thanks for the input and welcome to the happy thread, I
   must agree X-1a ran very well for me, but the B patch took it..
   over the top, happy tracking, production always finds a way !!
#58
Somerset
Max Output Level: -78 dBFS
  • Total Posts : 634
  • Joined: 2004/10/20 06:07:27
  • Location: Sydney, Australia
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:34:04 (permalink)
Downloaded and installed without issues. Not had much time to test yet, but it did run OK on a project started in X1a. Happy so far.
#59
StarTekh
Max Output Level: -55 dBFS
  • Total Posts : 2007
  • Joined: 2004/03/09 12:02:20
  • Location: Montreal
  • Status: offline
Re:X-1b installd !! (the happy thread) 2011/03/22 22:36:43 (permalink)
ShermanSmelville


Sorry StarTekh and Charlie,

I didn't mean it in a bad way!  


Noted: didnt mean to jump on ya .. Jon !!
#60
Page: < 123 > Showing page 2 of 3
Jump to:
© 2024 APG vNext Commercial Version 5.1