StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
X-1b installd !! (the happy thread)
> Audio feels tighter like it was in 8.5.3 im trying lower latency !!! > No issues so far, thanks for the link...
post edited by StarTekh - 2011/03/21 15:22:02
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !!
2011/03/21 12:50:32
(permalink)
lowerd latency , perfect audio.. thanks
|
jamesyoyo
Max Output Level: -40.5 dBFS
- Total Posts : 3460
- Joined: 2007/09/08 17:50:10
- Location: Factory Yoyo Prods Ltd.
- Status: offline
Re:X-1b installd !!
2011/03/21 12:57:45
(permalink)
STILL CAN'T PROPERLY ADJUST THE CLIP START TIME IN THE INSPECTOR.
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !!
2011/03/21 13:07:10
(permalink)
jamesyoyo
STILL CAN'T PROPERLY ADJUST THE CLIP START TIME IN THE INSPECTOR.
> I was at 256 samples im back to 128 try that>>!!
|
digi2ns
Max Output Level: -48.5 dBFS
- Total Posts : 2694
- Joined: 2010/11/24 14:27:12
- Location: MICHIGAN
- Status: offline
Re:X-1b installd !!
2011/03/21 14:43:41
(permalink)
Im Likin what I see so far as well ;)
MIKE --Dell Studio XPS I7/870 2.93 Ghz, 8GB Mem, 2-2TB Barracuda HDs, 500 GB Ext.HDD, Win7/64 --X1 64 Pro Expanded, Dual 21" Monitors --PCR500 --MAUDIO FastTrack Ultra --Mackie 1604 VLZ PRO --Line6 X3 Live --Gibson, Fender, Takamine, Schecter, Washburn http://pogopoppa.wix.com/5thgear# http://soundcloud.com/digi2ns
|
Lemonboy
Max Output Level: -77 dBFS
- Total Posts : 679
- Joined: 2004/05/31 11:36:59
- Location: Dorset, UK
- Status: offline
Re:X-1b installd !!
2011/03/21 14:48:56
(permalink)
I've had a quick play and X1b is much more stable for me. Although I was running X1a off a pretty full HDD, which I've now emptied a bit so that may also be helping!
Andy
|
Krokodilen
Max Output Level: -90 dBFS
- Total Posts : 45
- Joined: 2011/02/21 13:24:00
- Location: Sweden
- Status: offline
Re:X-1b installd !!
2011/03/21 14:49:43
(permalink)
Ahhh.. Per Clip automation DOES work!!!  Thx x1b K
|
M@ B
Max Output Level: -68 dBFS
- Total Posts : 1128
- Joined: 2010/01/05 20:54:54
- Status: offline
Re:X-1b installd !!
2011/03/21 19:57:08
(permalink)
downloaded and installed x1b in less than 5 minutes at around 3pm. everything seems cool by me, but then again, i was one of "those people" that x1a worked well for, except for the major stuff like v-vocal and audio snap of course, but that's fixed now, so i'll be checking into those pretty soon.
|
ba_midi
Max Output Level: 0 dBFS
- Total Posts : 14061
- Joined: 2003/11/05 16:58:18
- Location: NYC
- Status: offline
Re:X-1b installd !!
2011/03/21 20:02:46
(permalink)
jamesyoyo
STILL CAN'T PROPERLY ADJUST THE CLIP START TIME IN THE INSPECTOR.
Hey, this is the HAPPY thread -- NO complaints! LOL Take your meds :P
|
full_bleed
Max Output Level: -89 dBFS
- Total Posts : 53
- Joined: 2008/11/29 23:51:46
- Status: offline
Re:X-1b installd !!
2011/03/21 20:05:39
(permalink)
I'm excited to read about b working for someone. There's been so much negative feedback already.
Ma@ B - please weigh in on the v-vocal and audio snap when you get around to it.
|
Twigman
Max Output Level: -38.5 dBFS
- Total Posts : 3667
- Joined: 2006/08/24 04:45:15
- Location: United Kingdom of Great Britain & Northern Ireland
- Status: offline
Re:X-1b installd !!
2011/03/21 20:07:15
(permalink)
M@ B
except for the major stuff like v-vocal .... but that's fixed now, so i'll be checking into those pretty soon.
Good luck with that... :rolleyes:
|
emwhy
Max Output Level: -62 dBFS
- Total Posts : 1402
- Joined: 2006/01/03 15:09:02
- Status: offline
Re:X-1b installd !!
2011/03/21 20:13:59
(permalink)
OK a few things that I'm very happy about. When using the new Atlantis module of Tru Pianos at low latency I would get pops and clicks when my CPU started getting pushed. These are now gone completely and it runs quite smooth (SONAR 64). Also, I was having issues with jBridge when trying to freeze some tracks. It would crash jBridge (initially thought this was their issue). Happy to report that all jBridge plugins now freeze correctly. Pro Channel seems to be much smoother as well.
PS For thos of you wondering the Atlantis Tru Pianos module is something you get if you buy the full version (didn't want to create confusion).
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !!
2011/03/21 20:22:30
(permalink)
> Its a happy thread, not that Im easy to please , pitty im not 64b
|
M@ B
Max Output Level: -68 dBFS
- Total Posts : 1128
- Joined: 2010/01/05 20:54:54
- Status: offline
Re:X-1b installd !!
2011/03/21 20:30:31
(permalink)
Twigman
M@ B
except for the major stuff like v-vocal .... but that's fixed now, so i'll be checking into those pretty soon.
Good luck with that...
:rolleyes:
thanks, ...i think.
|
aaronuws
Max Output Level: -90 dBFS
- Total Posts : 8
- Joined: 2006/08/23 17:26:28
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 20:37:53
(permalink)
I downloaded, and hope this will fix all the crashes that I have had with X1a. Thanks Cakewalk (as of the moment, I have faith!) LOL  (fingers crossed)
|
meh
Max Output Level: -82 dBFS
- Total Posts : 431
- Joined: 2005/06/11 13:01:57
- Location: Tempe, Az
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 20:53:20
(permalink)
So Far...So Good...Now to try the more buggie issues.....
SONAR Version 2017.09
HP Z-420 Workstation
Intel Xeon W3680 @3.50ghz
32g memory 2tb disk space
Win2008 Server R2 Standard 64-bit
TASCAM US-1641 interface
|
wilqen
Max Output Level: -89 dBFS
- Total Posts : 74
- Joined: 2006/09/26 22:02:35
- Location: Eastern Oregon
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 20:56:35
(permalink)
Certainly feels more stable than before.I will have to dig in deeper, but this just feels right now . . .
Will Intel Core i7 3820, 16GB DDR3, Emu 1212m, 1.6+TB HDs WIN 7x64, SONAR ext X1d, Vegas Pro 11, Sound Forge Pro 10c, various others
|
sdpate67
Max Output Level: -84 dBFS
- Total Posts : 344
- Joined: 2008/03/09 09:59:21
- Location: Charlottetown, PEI
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 20:57:10
(permalink)
Installed on secondary computer and working on a new 2 track demo. Everything seems fine including adding some VST effects;
Asus i7-760 Win 8.1/ Sonar Platinum / Lynx Aurora 16 AES16 / Mackie MCU Pro XT C4 / Millennia Media STT1 x 2 TD-1/ UAD-2 Quad x 2 / Neumann O-300 O-810 U87 KM184 x 2 / Shure 57/58 Reverbnation NJN Network
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:01:31
(permalink)
wilqen
Certainly feels more stable than before.I will have to dig in deeper, but this just feels right now . . .
make a 16 bar demo. use cakewalk samples. vocals from 8.5.3, save it ...re open the prgm. highlight a clip deploy v vocal, what happens . i dont have 64b yet.
|
BretB
Max Output Level: -80 dBFS
- Total Posts : 508
- Joined: 2010/01/17 18:24:00
- Location: Oklahoma
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:14:55
(permalink)
Smooth install and happy so far.
Sonar Platinum - A&H ZED R16 - KRK VXT4's - Yamaha DTXpress IV & Gretsch Catalina Maple kits "Music is what feelings sound like" https://soundcloud.com/bret575b
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:19:37
(permalink)
Happy happy happy... x64 runs perfectly.
Playback of all 3 audio tracks goes smootly without any issues and CPU usage is under 70%.
System: i7-950, 3,5 GHz, 12 GB DDR, SSD + RAID0 arrays.
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:24:33
(permalink)
panup
Happy happy happy... x64 runs perfectly.
Playback of all 3 audio tracks goes smootly without any issues and CPU usage is under 70%.
System: i7-950, 3,5 GHz, 12 GB DDR, SSD + RAID0 arrays.
> snicker all 3 tracks: panup thanks for your work in .. back, id hoped a deal woulda been cut between you and cakewalk so we could see the updates in the X-1b patch...
|
panup
Max Output Level: -50 dBFS
- Total Posts : 2538
- Joined: 2006/05/23 09:34:35
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:28:12
(permalink)
StarTekh
> snicker all 3 tracks: panup thanks for your work in ..
back, id hoped a deal woulda been cut between you
and cakewalk so we could see the updates in the X-1b
patch...
X1b mods are online only hours after X1b patch... no deal needed :)
|
ShermanSmelville
Max Output Level: -89 dBFS
- Total Posts : 80
- Joined: 2010/12/22 14:44:53
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:38:40
(permalink)
It's working great for me 
|
StepD
Max Output Level: -79 dBFS
- Total Posts : 594
- Joined: 2003/11/08 01:03:52
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:45:41
(permalink)
Big performance gain here. I'm actually shocked. For an audio-only test, all I have to do is load the Cori Yacrkin project. With my older machine, I had to crank my ASIO buffer size to 1024 or higher to get it to play back, and the CPU meter always maxed out during the synth break at 2:25. Now I can play back at 256 samples with minimal pops, and completely smooth playback at 512, even at the synth break. Another project with 16 Kontakt instruments that barely played back at 1024 samples now plays back at 512. Hard to believe but true.
Core2 6600 2.40 GHz, ASUS P5B Deluxe, 8GB RAM, GeForce GT 630 2GB, 3 Seagate Sata, Echo AudioFire 4 asio, Windows 10 Pro 64-bit, Sonar Platinum, Cakewalk by Bandlab
|
Middleman
Max Output Level: -31.5 dBFS
- Total Posts : 4397
- Joined: 2003/12/04 00:58:50
- Location: Orange County, CA
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:48:59
(permalink)
I just want to be a part of a happy place. Oh and X1b working flawlessly here.*
*Disclaimer (for the way I work, the way I record. Opinion subject to change with no slight meant to laptop users, Windows XP users, people who loop incessantly, users running to many VSTs with too little memory, Firewire based soundcards, console view users, forum users who complain too much and can't find happiness regardless of the level of operability of the "the software" also known as X1 in any version)
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 21:49:21
(permalink)
> was at 256 went back to 128, very very ..tight
|
M@ B
Max Output Level: -68 dBFS
- Total Posts : 1128
- Joined: 2010/01/05 20:54:54
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 22:06:30
(permalink)
"maybe we ought to paint a happy little tree next to the pond right over here..."
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 22:11:41
(permalink)
M@ B
"maybe we ought to paint a happy little tree next to the pond right over here..."
>Well the cat looks happy sitting on the Arp, Its doing its job< seeing the osilators dont drift > please talk to the !
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:X-1b installd !! (the happy thread)
2011/03/21 22:26:26
(permalink)
Middleman
I just want to be a part of a happy place. Oh and X1b working flawlessly here.*
*Disclaimer (for the way I work, the way I record. Opinion subject to change with no slight meant to laptop users, Windows XP users, people who loop incessantly, users running to many VSTs with too little memory, Firewire based soundcards, console view users, forum users who complain too much and can't find happiness regardless of the level of operability of the "the software" also known as X1 in any version)
> This is the correct thread for you, Welcome to the Happy Thread..
|