cakewalk tts-1 sound continues

Author
Razor59
Max Output Level: -89 dBFS
  • Total Posts : 72
  • Joined: 2012/02/07 11:38:21
  • Status: offline
2018/10/23 14:24:04 (permalink)

cakewalk tts-1 sound continues

hi everyone. A question. Anyone know what this could be...using sonar x3 producer. While i was trying cakewalk tts-1 ,i noticed that while playing a lot of the instruments on my keyboard(casio wk3800)..the sound jams,that is a note keeps playing. Example was soprano sax..playing nicely,when suddenly a note would keep playing after hitting a key. Have to turn off the x3 to get rid of it. Happens with  most of the sax and reeds instruments  and just now the ethnic section. Any ideas ??/Ray
#1

7 Replies Related Threads

    promidi
    Max Output Level: -66 dBFS
    • Total Posts : 1220
    • Joined: 2014/11/21 18:46:39
    • Location: South Australia
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 03:52:56 (permalink)
    Have you tried increasing your MIDI "prepare using" setting to around 500?

    Windows 10 64bit fully patched, 16 gig ram . 
    PCR-800 Controller.  (Working in Win 10 1809 64bit)
    CPU: i5 4670. 
    Video: Nvidia GTX560ti (latest drivers).
    Audio IF: Focusrite 2i2 2nd Gen

    Internet always on.

    Software
    : Cakewalk by Bandlab (2018.09 B29)
    ASIO mode. 24bit 48khz 256 samples 
    Rapture Pro, AAS GS2, VS-3, EP-4, VA-2, Chromophone 2, Z3TA+ 2, Addictive drums 2, Addictive Keys, Mpowersynth (latest), Iris 2, GPO5, Sampletank 3,
    #2
    Razor59
    Max Output Level: -89 dBFS
    • Total Posts : 72
    • Joined: 2012/02/07 11:38:21
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 11:45:16 (permalink)
    ho promidi..yes i increased it from 250 to 500,,,still the same ..then to 550 ..same there.
     
    #3
    msmcleod
    Max Output Level: -72 dBFS
    • Total Posts : 920
    • Joined: 2004/01/27 07:15:30
    • Location: Scotland
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 11:47:14 (permalink)
    It sounds to me like either a Note Off message isn't being received, or there's a Sustain control message somewhere with no corresponding Sustain off (ctrl #64).
     
    Have you tried recording a MIDI track that reproduces the issue you're seeing, and looking at the MIDI Event List?

    Mark McLeod
    Cakewalk by BL | ASUS P8B75-V, Intel I5 3570 16GB RAM Win 10 64 + Win 7 64/32 SSD HD's, Scarlett 18i20 / 6i6 | ASUS ROG GL552VW 16GB RAM Win 10 64 SSD HD's, Scarlett 2i2 | Behringer Truth B2030A / Edirol MA-5A | Mackie MCU + C4 + XT | 2 x BCF2000, Korg NanoKontrol Studio
    #4
    Razor59
    Max Output Level: -89 dBFS
    • Total Posts : 72
    • Joined: 2012/02/07 11:38:21
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 13:44:28 (permalink)
    ji again promidi .i increased it to over 600 and it's working now.thanks
     
     
    #5
    Razor59
    Max Output Level: -89 dBFS
    • Total Posts : 72
    • Joined: 2012/02/07 11:38:21
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 13:49:51 (permalink)
    i noticed you mentioned sustain control  message. I also have a problem with some hammond vst's..for example VB3 ..when i'm using the sustain(#64) as on /off for the rotary..when the fast is on,the sustain seems to be still working..because when i take my hands off the  keys it still keeps playing,while my foot is on the pedal.IT should stop playing when i take my hands off?? So when its at off ,no probs changing chords..but when i change to fast ,everytime i change a chord the first chord is still playing. PS/when i use the modulation instead#1..it works perfect. It's like the sustain is on all the time when its pressed down
     
     
    #6
    scook
    Forum Host
    • Total Posts : 24146
    • Joined: 2005/07/27 13:43:57
    • Location: TX
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/10/24 14:02:08 (permalink)
    This may be a different issue but may be related to a known bug with CC64=0 in the X series affecting certain plug-ins. It took some time to identify and was not fixed until after the last update for X3. IOW, you will have to upgrade to get the fix but there is a way to correct the data in older versions of SONAR.
     
    This is the last thread about the problem http://forum.cakewalk.com/FindPost/3030997
    In this thread is an explanation of the bug http://forum.cakewalk.com/FindPost/3108848
    And a CAL script to fix the data http://forum.cakewalk.com/FindPost/3108868
    #7
    Razor59
    Max Output Level: -89 dBFS
    • Total Posts : 72
    • Joined: 2012/02/07 11:38:21
    • Status: offline
    Re: cakewalk tts-1 sound continues 2018/11/22 12:33:57 (permalink)
    sorted it out...in the menu drop down (CC) u can fix it there..thanks
     
    #8
    Jump to:
    © 2024 APG vNext Commercial Version 5.1