<Resolved> Panning mono tracks Not working X3e

I have to VOX tracks that are mono. The track settings show mono interleave.
 
I have them going to a stereo buss call VOX which is a stereo interleave.
 
When I pan the mono tracks, I do not get a left or right separation. I only get a lessening of audio. The VOX buss will pan left and right.
 
Any thoughts why the 2 mono tracks will not pan? I want to spread out the vox and not put them bot on the same place. 

Have you changed your pan laws? 

Thanks for your reply John.  
I opened the project in 8.5.3 and saved it. It now opens and works as expected in X3.  Really irritates me that I have to do that type of stuff to get X3 to work as expected. I am glad that I can move along with my project.
 
Little crap like this takes 20 minutes here and there which could be spent finishing up tasks in SONAR. I know no software is perfect, but it still doesn't stop me from wanting to use a product and expect it to work like it should.
 

i sometimes get busses that go bad, no longer work as expected. delete it and make a new one. make presets of any pc or fc settings.

good idea about deleting the busses. Hadn't tried that. I did disable to FX on the busses and tracks too. I did not delete them though. There was no differences. 
 
Thanks for the suggestion guys. I am really frustrated right now and need to enjoy the rest of the day not fighting SONAR. :)

First, it is absolutely 100% possible to take mono tracks, feed them into a stereo bus, and pan the each mono sound wherever you want in the stereo field. You can do this whether you're using a Send to a bus (use the Send Pan control), or directing the track output to the bus (use the track Pan control. If using a send bus, you have to make sure the Pre/Post settings work correctly with the track fader setting. For example, if you want Pan to be determined solely by the Send Pan control, you'll want either the Send set to Pre and the track fader down, or if the Send is set to Post, then you can set the track output to "none" and accomplish the same thing while still be able to use the track fader to control level.
 
There are multiple ways to mess up the routing to give the appearance of what you describe. The track output and send might be active at the same time. You may have hit the phase button by mistake instead of the interleave and now it's not visible, or the pre and post send and track controls may not be in sync.

Isn't there an option for "Clip Automation" in the track edit filter?

The screen shot does not contain enough information. I still don't know if other sends are in play, the channel output, etc. I think you may not fully understand signal flow within the mixer, this might be helpful: http://www.cakewalk.com/Documentation/default.aspx?Doc=Music%20Creator%206%20Touch&Lang=JP&Req=Mixing.07.html
 

In the image above, the track output is not set to a bus, it appears to be set hardware output

I was confused by the thread title. So this has nothing to do with routing mono tracks to buses anymore?

Have you tried to reproduce the issue in a new project? I am guessing this project was not started in X3.

Thanks for trying Craig. The above pic is showing a stereo output port.
 
I took the audio track and imported it into a new X3 project and it panned as expected. I don't think it is the RME connection to SONAR. I think it is an issue with SONAR importing older projects. Something got hosed in this project or wav file.

K, I will post a project.
 
Like I said a few times though, no plugs are on the track or buss(no buss involved) and a direct output from the track exhibits this issue as shown in the picture..

Guitarmech111
Here is the project. I opened the bundle by itself and it exhibited the pan issue I am having.
 
http://joyfulnoiseproductions.org/PAN.cwb

for anyone else that downloaded this, if downloaded as a wave file like it did for me, just change the ext, to cwb
 

I've just downloaded and tried on my machine that has the RME Fireface 400 hooked up and I can see the same problem but if I create a new track and move the audio it works fine.
 
Not tired on the machine that is hooked up to my UFX.