Another Superior 2.0 Question... SORRY!

Hey All,
 
Noel and the folks where kind enough to give me the older version of bitbridge (the CW workaround) so I could move on up to 8.5.1 64 bit Windows 7 and be able to use Superior!  WOOT!
 
I thought all was well.... and then.....
 
The kits load fine.... I can trigger Superior from the Superior interface by using the mouse and clicking on the any of the "drums" on the superior interface.... AND I can also trigger from the Piano Roll view using the mouse... and I can draw notes in the Piano roll view, hit play and hear superior just fine and dandy.  (I am using a custom drum map I made for my Roland setup by the way).
 
Here in lies the big problem.  For some reason when I physically play my Roland kit.... it doesn't seem to trigger Superior?
 
I am using the same drum map that I have been using..... I went back and opened 8.3..... and my kit triggers Superior just fine... with the EXACT same setup.
 
Is there something that I'm doing wrong in 8.5 that anyone can think of?  Has anyone had this problem.
 
Is there a button I need to push in 8.5 that I have never had to engage before?  I have been using Sonar since version 4.
 
It just doesn't seem like this is a bit bridge or jbridge kinda issue.... it looks like the input from my Rolands aren't getting to the plug-in for some reason. 
 
Any help would be appreciated.
 
Jon
 
PS.  I have been following EVERY thread on the forum concerning Superior working in this environment... so I think I'm kinda up to speed on most everything.  I DID NOT use Jbridge.... just the older build of bitbridge that CW provided....  AGAIN;  TRIGGERS FINE in 8.3 still.
 
 

Have you checked to make sure you have input monitoring engaged on the Superior tracks?

Dave,
 
After thinking about this for a minute... input monitoring is on the AUDIO tracks NOT the MIDI tracks, correct?.... I'm at work now so I wasn't in front of my DAW.
 
I'll double check and report back.
 
Thanks again!
 
Jon
 

hehehehe... I know ya don't Dave!  lololol
 
But alas, I got home RAN upstairs...... turned on the input echo... turned it off.... kicked the monitors...hehehe...not really....
 
Played around with settings in the drum map.....etc... etc...
 
nada...
 
If your not a drummer and your using Superior with midi loops you should be good to go.
 
If you ARE a drummer and wanna trigger Superior with a kit..... your out of luck it seems.....
 
Oh well, at least I have 8.5.1 installed and registered.... back to 8.3 (64 bit) for me!  BUMMER but NOT a show stopper!
 
Back to patiently waiting until SD goes 64 bit.... it appears that it might not be long!
 
Thanks for the help Dave!  and I hope that I may have saved a drummer or two the time.
 
Jon
 

That is where I keep it all the time.
 
Working fine in 8.3 I'm rocking out right now!!! hehehehe
 
Jon