Brad Russell
Max Output Level: -86 dBFS
- Total Posts : 222
- Joined: 2003/11/06 10:15:06
- Location: North Little Rock, Arkansas
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 11:44:06
(permalink)
|
bobguitkillerleft
Max Output Level: -72 dBFS
- Total Posts : 944
- Joined: 2011/05/17 17:28:58
- Location: Adelaide Australia
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 13:21:48
(permalink)
Frostysnake jonathan1967 Marcus, do you know whether the converters in the VS-100 as good as the ones in the V-Studio 700? How well does it integrate with X2? Thanks, Jonathan It has the same converters as the VS-700, which are great! It integrates very nicely...I got mine from Sam Ash for 250....they were having a sale...might want to see if it's still available... THAT is very cool!,I wasn't sure,as I got mine very cheap too,but NOT new[$162.50 AUD ebay auction,only 4 bids!]but I'm using it as my audio interface ONLY,as I haven't had the time/wherewithal,to get it happening as a controller yet,I guess it has something to do with the fact,that at 48,I've only used a computer ever,for about 2 years,never before having owned or used one...the Daw concept,got me some of the way,out of "Ludite'sville". Re-entering into music these past 2 years[exactly]has been a steep curve for a guitar player,who always wanted to be a drummer[alluding to something?],as a child,though my parents wouldn't deal with noisy drums....100w Marshalls,must have been possibly worse,but I was a late starter at 18,so they only had to put up with attempts at "Eruption"for only a short while heh heh. Cheers all Bob
post edited by bobguitkillerleft - 2013/04/24 13:28:15
https://soundcloud.com/rks26https://en.wikipedia.org/wiki/The_Hitmen Lenovo W540 Factoryrefurb SONAR PLATINUM,Ozone 7 N.I. KA6 Komplete 9 SSD4 Platinum Epi L/H LP Custom Headstock broken twice and fixed.Gibson L/H Les Paul 2010 Wine Red Studio stupid Right Hand Vol.Tone for Left Hand?LH84Ibanez RS135 gen.FloydRose JB Marshall 100w 2203 4x25w Celestion Green backs "You are what you is"-Frank Zappa "But I'm gonna wave my freak flag high"-Jimi Hendrix
|
listen
Max Output Level: -79 dBFS
- Total Posts : 593
- Joined: 2008/09/12 06:07:55
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 15:14:51
(permalink)
- Listen - FOH Mixer & Recording Studio Manager Nothing but the grace of God - mggtg. VS 700C - R / CONSOLE 1 / NEVE PORTICO 5017 / TASCAM UH-7000 / SONAR PLATINUM / REASON RECORD 9 / VMP 2 / UREI 7110's / UA LA-610 MkII / AUDIENT ASP 880 / CREATION STATION 450 V 5 WINDOWS 10 / HOME 64 - BIT / SKYLAKE CORE i7 (i7 - 6700, 4 CORES/8 THREADS)
|
pfl
Max Output Level: -90 dBFS
- Total Posts : 11
- Joined: 2005/11/11 20:58:47
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 15:53:32
(permalink)
|
kzmaier
Max Output Level: -81 dBFS
- Total Posts : 461
- Joined: 2010/10/18 08:20:01
- Location: Rochester, NY
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 17:45:56
(permalink)
Korg Nano Kontrol2 in Mackie mode. Would have went with bfc2000 if it was less expensive or had more features.
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:Who is using any control surface with X2?
2013/04/24 17:50:17
(permalink)
Cakewalk A-800PRO, AKAI LPD8 with ACT, (Mostly commands with PADS + SEND Levels) 2x Yamaha 02R 96 with Cascade + ADAT cards, Analog I/O
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
hlock
Max Output Level: -90 dBFS
- Total Posts : 1
- Joined: 2013/04/26 13:16:40
- Status: offline
Re:Who is using any control surface with X2?
2013/04/26 13:24:27
(permalink)
I use a BCF2000 and a Contour Shuttle Xpress
|
PaulF
Max Output Level: -90 dBFS
- Total Posts : 16
- Joined: 2003/11/07 16:22:06
- Location: Essex, UK
- Status: offline
Re:Who is using any control surface with X2?
2013/04/26 16:13:38
(permalink)
|
rloseven
Max Output Level: -89 dBFS
- Total Posts : 74
- Joined: 2007/10/11 16:43:05
- Status: offline
Re:Who is using any control surface with X2?
2013/04/26 23:14:37
(permalink)
|
cmemx
Max Output Level: -90 dBFS
- Total Posts : 42
- Joined: 2012/04/28 22:17:33
- Status: offline
Re:Who is using any control surface with X2?
2013/04/28 07:06:06
(permalink)
|
axlshot
Max Output Level: -90 dBFS
- Total Posts : 3
- Joined: 2013/04/27 08:19:26
- Status: offline
Re:Who is using any control surface with X2?
2013/04/28 07:51:59
(permalink)
MCU pro and Korg Nanopad+kontrol 2
|
KevWest
Max Output Level: -90 dBFS
- Total Posts : 28
- Joined: 2013/04/21 22:44:45
- Location: Seattle, WA
- Status: offline
Re:Who is using any control surface with X2?
2013/04/28 08:05:10
(permalink)
i used a bcf 2000 with x1 for a while. i also have a maschine mk 2
|
siordanescu
Max Output Level: -87 dBFS
- Total Posts : 194
- Joined: 2010/08/02 13:34:14
- Location: Timisoara/Romania
- Status: offline
Re:Who is using any control surface with X2?
2015/03/13 06:02:27
(permalink)
M-audio projectmix and UC 33e
HP EliteBook 8460p Intel core i7-2620M, 2,7 ghz, 8G RAM, Win 10 x64, CAKEWALK by BANDLAB, SONAR PLATINUM, M-AUDIO PROJECTMIX, ALESIS IO 26, TASCAM US 16x08, TC ELECTRONIC KONNEKT 24 D, ROLAND V SYNTH, ROLAND XP 50, M AUDIO PROKEYS 88.
|
TremoJem
Max Output Level: -81 dBFS
- Total Posts : 479
- Joined: 2008/04/10 09:42:25
- Location: NY
- Status: offline
Re:Who is using any control surface with X2?
2015/03/13 06:49:55
(permalink)
Roland PCR A800 Pro or whatever they call it. Someday I will get out of my own way and actually hook it up.
Purrrfect Audio LLC Pro Studio, Sonar X3e PE X64, Win7 Pro 64Bit - Dell Inspiron 1760, Sonar 7 PE X64, Win7 Pro 64Bit - iZotope Ozone 5 & Alloy 2 - MOTU Audio Express & 2 MOTU 8Pre - Glyph & Lacie External HDs - Roland A-800Pro - Mackie MR5mkIII - Shure - AKG - Sennheiser Most importantly...not enough time. www.studiocat.com jim@studiocat.com
|
FCCfirstclass
Max Output Level: -71 dBFS
- Total Posts : 969
- Joined: 2003/11/15 15:02:42
- Location: Las Vegas, Nevada
- Status: offline
Re:Who is using any control surface with X2?
2015/03/13 08:52:00
(permalink)
VS 100 and A 800 Pro. jonathan1967 Marcus, do you know whether the converters in the VS-100 as good as the ones in the V-Studio 700? How well does it integrate with X2? Thanks, Jonathan
According to Roland, the converters are the same for both.
Win 10 Pro x64, 32Gb DDR3 ram, Sonar Platinum, Cubase 9.5, Mackie MCU Pro, Cakewalk VS 100, Roland Octa-Capture, A 800 Pro, Carver M-1.5t amp & C4000 pre amp, various mics, drums and brass instruments. And away we go!
|
AT
Max Output Level: 0 dBFS
- Total Posts : 10654
- Joined: 2004/01/09 10:42:46
- Location: TeXaS
- Status: offline
Re:Who is using any control surface with X2?
2015/03/13 10:29:13
(permalink)
The VS 100 and 700 preamp/converters are the same, or at least sound the same. Good stuff. In fact, the only difference in hardware between the two (except the 700 has more of it) are the faders. Cake confirmed that the 100 had a different fader - and it was smoother. @
https://soundcloud.com/a-pleasure-dome http://www.bnoir-film.com/ there came forth little children out of the city, and mocked him, and said unto him, Go up, thou bald head; go up, thou bald head. 24 And he turned back, and looked on them, and cursed them in the name of the Lord. And there came forth two she bears out of the wood, and tare forty and two children of them.
|
wolfstudios53
Max Output Level: -87 dBFS
- Total Posts : 152
- Joined: 2004/11/15 07:29:47
- Location: Northeast Ohio
- Status: offline
Re:Who is using any control surface with X2?
2015/03/15 09:45:23
(permalink)
AlphaTrack and Bcf2000. They work very well with Win7/64.
Asus P6T - i7/920 - 18 GB ram - Nvidia ASUS GT640 Video - 3-1.5 TB HD - Focusrite 20/20 Sonar Platinum - Faderport 16 - Big Knob - Soundcraft - DA-30 - MR-2 - RT 707 - Studio equipment/Synth modules/keyboards/guitars Little time to use them!
|
koolbass
Max Output Level: -73 dBFS
- Total Posts : 853
- Joined: 2003/11/13 23:27:43
- Location: Nashville, TN
- Status: offline
Re:Who is using any control surface with X2?
2016/03/10 00:45:10
(permalink)
deanx I've been uming and aghing about getting a control surface for a while but am worried about shelling out and it not playing with X1 / X2. I wanted the VS700 but the threads here suggets Cake have forgotten about it. The SSL Nucleas seeems a nice alternative http://www.solid-state-logic.com/music/nucleus/ as does the the If I was certain my wife wouldn't castrate me I'd get a Allen & Heath GSR24M http://www.allen-heath.com/uk/products/pages/productdetails.aspx?CatId=GSSeries&ProductId=GSR24 I'm wondering if Steven Slates Raven MTX will play with Sonar, but I have a suspicion that it would cost me more than just my manhood http://www.youtube.com/watch?v=4HHiXqcyu2M I think it's coming down to an Acer 27" TouchScreen, that should keep the bankmanger (Wife) happy, and although I won't have the physical knobs and faders, it still llooks like touch offers some workflow improvments on what I already have. http://www.acer.co.uk/ac/en/GB/content/model/UM.HT2EE.001 Thanks Dean
I realize I'm replying to an old post, but I'm in the process of configuring my new computer set-up, and I'm using the Acer 27" Touch Screen and a Contour Shuttle Pro V2, with my computer a Win 10 x64 and Sonar Platinum. So far, working ok, but I'm still setting up some of the stuff.
Cheers, Lance "koolbass" Martin Sonar Platinum, Sound Forge Pro 12, ADK built audio computer: Intel 8 core i7 Haswell-E overclocked 4.2GHz; 32 Gig DDR4/2666 ram; Corsair 850W power; Windows Pro 10 x64; Geforce GTX 980 video w/4 monitors (Acer 27" touch screen/primary); 3 Seagate drives - OS, audio, samples, 2 TB external USB3 bkup drive; RME MADIface XT; Ferrofish A16 MKII ADDA; Lucid GenX 6-96 clock www.BoogieHouseMusic.com
|