bvideo
Max Output Level: -58 dBFS
- Total Posts : 1707
- Joined: 2006/09/02 22:20:02
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 12:42:53
(permalink)
Views in the dock sometimes quit drawing (e.g. event list and tempo). Instead, when the tab for that view is selected, a light blue rectangle with the title of the view appears but the previous view is mostly still visible.
|
Noisy Neighbour
Max Output Level: -81 dBFS
- Total Posts : 460
- Joined: 2011/06/12 15:33:41
- Location: Amsterdam / NL
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 12:53:43
(permalink)
bapu
It's not my list, it's out list.
Sorry, no offense, just wrong choice of word... our list it shall be : ) what I ment... I rememeber there where some threads about Melodyne not working well (if not at all) as a clipbased effect (kind of like V-Vocal) in Sonar. So not exactly related to X2...
Daniel LAVA LAMP, Sonar Platinum Intel Core i7-2600 CPU 3.40 GHz, 16 Gig Ram, Windows 10 x64 M-Audio Fast Track C400 A-500 Midi Keyboard Controller, Yamaha MSP7, Yamaha HS50 Monitors, (a bit of room treatment) plugins, guitars, Take a Look Inside
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 12:55:04
(permalink)
Just yankin' yer chain.
I've had no probs with Melodyne as a clip based effect. But I have Editor not Essentials.
|
Noisy Neighbour
Max Output Level: -81 dBFS
- Total Posts : 460
- Joined: 2011/06/12 15:33:41
- Location: Amsterdam / NL
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 13:13:06
(permalink)
Editor here too ... but I'm relativly new to Melodyne, and still have to figure out the most efficient way to work with it in Sonar (No ARA support in X2 :( ... Hey, that fits y... our topic!!! ) At the moment I do most editing in standalone mode to be on the save side.
...mayby you could refere to some information that could help...? (...oh, now I'm drifting away from the topic of the list..)
have a rockin' good end of the weekend!
Daniel LAVA LAMP, Sonar Platinum Intel Core i7-2600 CPU 3.40 GHz, 16 Gig Ram, Windows 10 x64 M-Audio Fast Track C400 A-500 Midi Keyboard Controller, Yamaha MSP7, Yamaha HS50 Monitors, (a bit of room treatment) plugins, guitars, Take a Look Inside
|
bapu
Max Output Level: 0 dBFS
- Total Posts : 86000
- Joined: 2006/11/25 21:23:28
- Location: Thousand Oaks, CA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 13:16:36
(permalink)
Not much to say re: Melodyne. Ever since rev 2.1 it just works the way I expect it to. I set buffers to 1024 (I work in ASIO). I apply Melodyne to a clip. I edit. I bounce to track. I delete the old track. Never a crash. Never a bad track (sans that it's me playing or singing ).
|
Noisy Neighbour
Max Output Level: -81 dBFS
- Total Posts : 460
- Joined: 2011/06/12 15:33:41
- Location: Amsterdam / NL
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 13:24:12
(permalink)
ASIO here as well , same procedure...gonna check the settings again... I'll get it sooner or later...
thnx for the hint :)
Daniel LAVA LAMP, Sonar Platinum Intel Core i7-2600 CPU 3.40 GHz, 16 Gig Ram, Windows 10 x64 M-Audio Fast Track C400 A-500 Midi Keyboard Controller, Yamaha MSP7, Yamaha HS50 Monitors, (a bit of room treatment) plugins, guitars, Take a Look Inside
|
char27
Max Output Level: -90 dBFS
- Total Posts : 10
- Joined: 2010/01/29 19:08:49
- Location: Illinois
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 14:20:04
(permalink)
Most of my crashes seem to happen when adjusting the master volume under certain conditions as well. Seems that after browsing loops its more likely to crash when trying to change the master volume. Frustrating.
I have not narrowed it down yet to anything specific. I am starting to suspect that its caused from a memory/resource leak. Those can sometimes lead to crashes at a later time after the leak and can be difficult to replicate.
Some crashes have Sonar asking about saving my work and sometimes not. However, I have not seen it properly recover anything I was doing when it crashed :(
I have the same issues with the task hanging as well. I can eventually kill the process but it takes a few min sometimes
|
bjornpdx
Max Output Level: -75 dBFS
- Total Posts : 759
- Joined: 2010/12/10 11:41:29
- Location: Portland, Oregon
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 14:22:22
(permalink)
I think I found a bug but I need confirmation. Try this: In PRV insert a couple of patch changes in a clip via the events list. Play the clip. Now switch to track view by either hitting D or clicking on the Track tab. When I do this I get a partial track view and partial piano roll view and a series of vertical lines that are generated when I move the mouse. And then Sonar usually crashes. Anyone else get this?
|
arachnaut
Max Output Level: -67 dBFS
- Total Posts : 1168
- Joined: 2007/05/05 17:24:33
- Location: Sunnyvale, CA USA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 14:28:08
(permalink)
ashtangakasha
Arpeggiator Preset prev/next buttons don't work after losing focus. Minor issue, but huge pain when surfing the presets. If Preset dropdown has focus, prev/next jump to first preset in first section of presets category.
I've seen this, too.
- Jim Hurley - SONAR Platinum - x64 - Windows 10 Pro ASUS P8P67 PRO Rev 3.0; Core i7-2600K@4.4GHz; 16 GB G.SKILL Ripjaws X; GeForce GT 740; Saffire Pro14 MixControl 3.7; Axiom 61 64-Bit audio, SR: 48kHz, ASIO 256 samples latency, Rec/Play I/O Buffers 512k, Total Round Trip Latency 13 ms, Pow-r 3 dither
|
arachnaut
Max Output Level: -67 dBFS
- Total Posts : 1168
- Joined: 2007/05/05 17:24:33
- Location: Sunnyvale, CA USA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 14:44:27
(permalink)
Yesterday I spent the whole day setting up a 'Normal' startup template that I configure as the startup project.
I set up the Project Info, Track descriptions, all the initial Prochannel tracks, my 5 favorite VST synth tracks, custom track icons, screensets, track heights, Control Bar layout etc. etc. All that icky stuff that you do once and forget it.
I had a few crashes doing so - I think 2 or maybe 3. Each time Sonar task could not be killed and the 'Analyze wait chain' showed nothing abnormal. Two threads were running in wmaud.sys, I think, in the ASIO drivers. I did not get a crash dump, but I do have WINDBG installed so it intercepted the crash. '!analyze -v' to get the stack analysis did not give a stack trace - nothing I could interpret, so I disregarded it and restarted. I guess the stack got clobbered.
The crash dump reporter for Cakewalk did not run and no MINIDUMP file was made in C:\Users\<me>\AppData\Roaming\Cakewalk\SONAR X2 Producer\Minidumps.
The next time this happens I'll investigate more closely.
One thing I noticed is that the new Smart Grip Snap to setting always seem to get reset to 1/2 note. I have it set to whole note and the secondary setting to 1/4 note. The secondary setting (Hold 'N') is tricky to use. But if I do it, it shows 1/4 note, then when off it goes back to 1/2 note.
- Jim Hurley - SONAR Platinum - x64 - Windows 10 Pro ASUS P8P67 PRO Rev 3.0; Core i7-2600K@4.4GHz; 16 GB G.SKILL Ripjaws X; GeForce GT 740; Saffire Pro14 MixControl 3.7; Axiom 61 64-Bit audio, SR: 48kHz, ASIO 256 samples latency, Rec/Play I/O Buffers 512k, Total Round Trip Latency 13 ms, Pow-r 3 dither
|
synkrotron
Max Output Level: -22.5 dBFS
- Total Posts : 5263
- Joined: 2006/04/28 16:21:21
- Location: Warrington, UK
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 14:47:57
(permalink)
R-MIX does not work for me, but it does work okay in X1. Edit : All okay now. Problem appears to have fixed itself.
post edited by synkrotron - 2012/09/24 02:44:28
http://www.synkrotron.co.uk/Intel Core™i7-3820QM Quad Core Mobile Processor 2.70GHz 8MB cache | Intel HM77 Express Chipset | 16GB SAMSUNG 1600MHz SODIMM DDR3 RAM | NVIDIA GeForce GTX 675M - 2.0GB DDR5 Video RAM | 500GB Samsung 850 Pro SSD | 1TB Samsung 850 Pro SSD | Windows 10 Pro | Roland OCTA-CAPTURE | SONAR Platinum ∞ FFS| Too many VSTi's to list here | KRK KNS-8400 Headphones | Roland JP-8000 | Oberheim OB12 | Novation Nova | Gibson SG Special | PRS Studio
|
chrisland
Max Output Level: -90 dBFS
- Total Posts : 29
- Joined: 2011/03/04 06:33:54
- Location: Sweden
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 15:00:49
(permalink)
Noticed that when running X2 in Windows7 32-bit it very quckly uses up ram. Last sessions over 2 Gbit dedicated to X2 and about 100+ hard fults/sec. (A hard fault (also known as a page fault) occurs when the page of the referenced address is no longer in physical memory and has been swapped out or is available from a backing file on disk.)
Did not see this behavior in X1, not at all a memeory hog like X2 seems to be.
Is X2 aimed and optimized for 64-bit systems?
Maybe explains why I keep having frequent crashes. Am going to try to use a usb-stick as a readyboost dedicated unit, maybe it will help with this issue...
Asus P8Z77-V LX, Intel i5-3570K, 8 gig ram, Line6 UX2, M-Audio C400 mostly uses this one, Waveterminal 192-m, ATI 6970. Windows 7 64-bit, Sonar X3D 64-bit. And lots of plugins. christian-landstrom.se
|
Wookiee
Rrrrugh arah-ah-woof?
- Total Posts : 13306
- Joined: 2007/01/16 06:19:43
- Location: Akahaocwora - Village Yoh Kay
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 15:08:46
(permalink)
Had two crashes, seems to relate to Korg M1 emulation, which I think is bit-bridged, sent crash reports both time.
Life is not about waiting for the storm to pass, it's about learning to dance in the rain.
Karma has a way of finding its own way home.
Primary, i7 8700K 16Gigs Ram, 3x500gb SSD's 2TB Backup HHD Saffire Pro 40. Win 10 64Bit Secondary i7 4790K, 32GB Ram, 500Gb SSD OS/Prog's, 1TB Audio, 1TB Samples HHD AudioBox USB, Win 10 64Bit CbB, Adam's A7x's - Event 20/20's, Arturia V6, Korg Digital Legacy, Softube Modular, Arturia Keylab-88, USB-MidiSport 8x8
|
vicevursa
Max Output Level: -90 dBFS
- Total Posts : 31
- Joined: 2006/09/26 13:38:24
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 17:34:22
(permalink)
guylemec
guylemec
I opened an X1d project in X2.
The output routing dropdown in all audio and instrument tracks, in all buses, in track and console view does not respond.
I cannot re-route audio at all from what was set to at open.
I closed X2, reopened X2, created a new project (Normal), added 2*audio and 2*midi tracks... all output routing dropdowns now operational.
I opened another X1d project and all output routing dropdowns are also operational.
Will o' the wisp... or what?
I have a similar issue, which has not been blessed by the Will o' the wisp as of yet. The drop down menu for the output routing works. I can select whatever is listed in there. It's the input routing that is not working for me. I can see my VS700 listed, but I can't choose the specific input. I installed X2 last night and played my latest X1 project through everything just to make sure the basics would work. Today, I hear nothing (no input, therefore, no output). I have opened a new project and added one audio track and nothing. I opened up X1 and compared my settings - just to make sure I didn't miss anything. Everything looks to be correct. X1 is working fine, too. I have dealt with Rapture not registering (I think mine is working, now). But I have to be able hear something... Any ideas on what I might be missing or fogetting to check? Thanks!
v/r Vice Sonar X2, Win7 SP1 64bit, i7 Quad, 16GB RAM, Wharfdale 8.2 (pr.), VS-700 (Console and I/O unit), Delta 1010, Midisport 8x8, Keystation Pro88, Axiom 61, Alesis QS6.1, Acoustic and Electric guitars, VSTi's, and a shaker or two.
|
vicevursa
Max Output Level: -90 dBFS
- Total Posts : 31
- Joined: 2006/09/26 13:38:24
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 17:42:21
(permalink)
vicevursa
guylemec
guylemec
I opened an X1d project in X2.
The output routing dropdown in all audio and instrument tracks, in all buses, in track and console view does not respond.
I cannot re-route audio at all from what was set to at open.
I closed X2, reopened X2, created a new project (Normal), added 2*audio and 2*midi tracks... all output routing dropdowns now operational.
I opened another X1d project and all output routing dropdowns are also operational.
Will o' the wisp... or what?
I have a similar issue, which has not been blessed by the Will o' the wisp as of yet. The drop down menu for the output routing works. I can select whatever is listed in there. It's the input routing that is not working for me. I can see my VS700 listed, but I can't choose the specific input. I installed X2 last night and played my latest X1 project through everything just to make sure the basics would work. Today, I hear nothing (no input, therefore, no output). I have opened a new project and added one audio track and nothing. I opened up X1 and compared my settings - just to make sure I didn't miss anything. Everything looks to be correct. X1 is working fine, too. I have dealt with Rapture not registering (I think mine is working, now). But I have to be able hear something... Any ideas on what I might be missing or fogetting to check?
Thanks!
D'oh! Of course, I ran one more check through the settings and found that Playback Timing Master was set to none. Set that to VS-700 MAIN and now things are SOUNDING great! Thanks!
v/r Vice Sonar X2, Win7 SP1 64bit, i7 Quad, 16GB RAM, Wharfdale 8.2 (pr.), VS-700 (Console and I/O unit), Delta 1010, Midisport 8x8, Keystation Pro88, Axiom 61, Alesis QS6.1, Acoustic and Electric guitars, VSTi's, and a shaker or two.
|
arachnaut
Max Output Level: -67 dBFS
- Total Posts : 1168
- Joined: 2007/05/05 17:24:33
- Location: Sunnyvale, CA USA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 17:56:40
(permalink)
arachnaut
...CUT...
One thing I noticed is that the new Smart Grip Snap to setting always seem to get reset to 1/2 note. I have it set to whole note and the secondary setting to 1/4 note. The secondary setting (Hold 'N') is tricky to use. But if I do it, it shows 1/4 note, then when off it goes back to 1/2 note.
Oh, now I see what is happening. The snap resolution is overridden by the zoom factor. As you zoom in the snap value automatically shortens and as you zoom out it lengthens. Nice touch. I must say there are quite a lot of really nice refinements in X2. It's almost as if every spot on the screen were context sensitive.
- Jim Hurley - SONAR Platinum - x64 - Windows 10 Pro ASUS P8P67 PRO Rev 3.0; Core i7-2600K@4.4GHz; 16 GB G.SKILL Ripjaws X; GeForce GT 740; Saffire Pro14 MixControl 3.7; Axiom 61 64-Bit audio, SR: 48kHz, ASIO 256 samples latency, Rec/Play I/O Buffers 512k, Total Round Trip Latency 13 ms, Pow-r 3 dither
|
indravayu
Max Output Level: -88 dBFS
- Total Posts : 127
- Joined: 2006/08/07 11:29:04
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 18:02:45
(permalink)
I've opened up a couple projects now since installing X2 - I've noticed that sometimes the ProChannel doesn't scroll (in one case making it impossible for me to access the LPF/HPF on the EQ for one of my buses).
|
arachnaut
Max Output Level: -67 dBFS
- Total Posts : 1168
- Joined: 2007/05/05 17:24:33
- Location: Sunnyvale, CA USA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 18:31:37
(permalink)
I have not experienced any missing Prochannel modules, but I usually keep them collapsed unless they are enabled.
I have noticed that if I insert a new Prochannel module, sometimes a previously-collapsed module opens up.
Very Minor Nit...
Also I noticed that you can remove them all except for the EQ.
Another "Very Minor Nit...™."
- Jim Hurley - SONAR Platinum - x64 - Windows 10 Pro ASUS P8P67 PRO Rev 3.0; Core i7-2600K@4.4GHz; 16 GB G.SKILL Ripjaws X; GeForce GT 740; Saffire Pro14 MixControl 3.7; Axiom 61 64-Bit audio, SR: 48kHz, ASIO 256 samples latency, Rec/Play I/O Buffers 512k, Total Round Trip Latency 13 ms, Pow-r 3 dither
|
gray36
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2010/03/12 10:22:18
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 19:22:16
(permalink)
Any serious problems loading on top of X1d Expandedx64, I read afew posts were X1 got corrupted? What's the consensus? Please, I haven't made the plunge yet!
HP Pavilion dv6 Intel Duo Core 2 2.20GHz T6600, Windows 7 x 64, Guitar tracks Pro 4, SonarX1dEXP,SonarX2Prod. 8.5.3, Focusrite Saffire 6 USB, JBL monitors, Alesis SR-16, Guitar Rig 4 Pro, PRS SE, Epiphone Les Paul Custom, Cort SJ-10 ,Steven Slate 3.5, Akai MPK25, Glyph GT 050Q (500GB)RP1000 http://soundcloud.com/mar...ayin-around-mix1
|
arachnaut
Max Output Level: -67 dBFS
- Total Posts : 1168
- Joined: 2007/05/05 17:24:33
- Location: Sunnyvale, CA USA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 20:48:09
(permalink)
gray36
Any serious problems loading on top of X1d Expandedx64, I read afew posts were X1 got corrupted? What's the consensus? Please, I haven't made the plunge yet!
I had no problems, I have Producer Expanded x64 at X1d and it works fine still after the upgrade.
- Jim Hurley - SONAR Platinum - x64 - Windows 10 Pro ASUS P8P67 PRO Rev 3.0; Core i7-2600K@4.4GHz; 16 GB G.SKILL Ripjaws X; GeForce GT 740; Saffire Pro14 MixControl 3.7; Axiom 61 64-Bit audio, SR: 48kHz, ASIO 256 samples latency, Rec/Play I/O Buffers 512k, Total Round Trip Latency 13 ms, Pow-r 3 dither
|
CL2Zero
Max Output Level: -89 dBFS
- Total Posts : 100
- Joined: 2012/07/09 21:40:14
- Location: location, location
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 20:49:36
(permalink)
The only problem that I am seeing is in a project started in X1d Producer Expanded.
I opened it in X2 and have saved it as an X2 project. Sometimes the vertical now time line will stick and not move at all.
It's not the thing where you can hit the Scroll Lock button and toggle it on or off. Because that doesn't help.
I can rewind, fast forward and play. But the timeline does not scroll.
So far, the only way to fix this is to exit the project, and re open it.
At this point, I have only noticed this in one particular project. I guess becasue I have been working on it the most.
This is on a 32-Bit Windows 7 system.
Sonar Platinum, Win 10 64-bit, AMD FX 4170 CPU 4X 4.2 Ghz, MSI 970 mobo, 16-Gigs DDR3 Kingston RAM, Corsair M4 SSD, 2 Velocaraptor HDs, MSI HD7770 GPU, Ultra 1000 PSU
|
LLyons
Max Output Level: -79 dBFS
- Total Posts : 574
- Joined: 2004/08/25 12:48:39
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 20:58:06
(permalink)
I had one issue - while a project was running, drop a waves (latest version) reverb into the effects bin, screen went white - but sonar captured the error and asked me if I wanted to send it in.. Sure!
I just ran into a new one. Dropped in R-MIX on a mono track in the console while sonar was running. All the visual activity was drawing on the far left of the window. I dragged the selector box towards the left to drop onto the image and the screen went white and came back - the song stopped, and the track it was in kept going - but it was a recursion echo that began to run away, this time no automatic sonar error capture, had to jump quick and kill the audio engine - nasty noise.
I am running on an AMD 64 bit 6200 2 core, on windows 7 with current updates. Sonar 64 bit. No other programs loaded on my machine - its JUST for sonar.
Loving the take lanes for audio - automation lanes - and the zoom feature in the timeline - and Breverb - and the new left/right button lasso changes - and the audio engine update . Not sure about the Roland R MIX tool though, I will stay away from it for a while..
After three days - wouldn't change my decision to go to X2 AT ALL.
Best Regards,
L
|
gray36
Max Output Level: -83 dBFS
- Total Posts : 372
- Joined: 2010/03/12 10:22:18
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 21:22:03
(permalink)
Thank you kindly gentlemen, sounds promising, now the begging, and deal making with the wife, probably be my biggest bug!!! All suggestions are welcome,lol!
HP Pavilion dv6 Intel Duo Core 2 2.20GHz T6600, Windows 7 x 64, Guitar tracks Pro 4, SonarX1dEXP,SonarX2Prod. 8.5.3, Focusrite Saffire 6 USB, JBL monitors, Alesis SR-16, Guitar Rig 4 Pro, PRS SE, Epiphone Les Paul Custom, Cort SJ-10 ,Steven Slate 3.5, Akai MPK25, Glyph GT 050Q (500GB)RP1000 http://soundcloud.com/mar...ayin-around-mix1
|
Integra2112
Max Output Level: -90 dBFS
- Total Posts : 20
- Joined: 2003/11/21 03:40:22
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 21:32:58
(permalink)
Im finding x2 studio completely unuseable. My x1 projects are loading slower in x2, and are incredibly sluggish (especially any that use 32bit plugins in bitbridge). When I solo or mute a track in the track view, the entire interface freezes, and can take several seconds (up to 7 or so) to unfreeze. This doesnt occur with Busses, only tracks. The more plugins I have loaded in bitbridge, the worse it is. Additionally, it doesnt matter if playback is running or not, i still get the freezing.
Pretty disappointed as this never happens in x1. I've reinstalled a few times.
Im using Win 7 64 bit. i5-2500k cpu. 16 gigs ram. Multiple Seperate 7200rpm drives for O.S./Samples/project storage.
|
Marcus Curtis
Max Output Level: -72 dBFS
- Total Posts : 945
- Joined: 2007/09/04 22:50:09
- Location: Tulsa
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 21:50:25
(permalink)
well I have not fully tested everything yet. So far X2 seems more stable then X1 the LP 64 EQ and the LP 64 multi band seems to work better. IMHO The rendering and export functions are greatly improved.
So far I have only had one problem. There seems to be a problem with the pro channel. When ever I load a preset. then insert a module. only part of the module appears. I got to collapse it then expand it for the whole thing to appear.
There is also a question with breverb in the pro channel. I will open the preset to load a preset, but I don't see the preset window collapse once it is loaded. I don't see a button to close the preset window. This might be because I am unfamiliar with the plug in. It may not be a bug.
So to conclude there seems to be an issue changing out modules after a preset is loaded, I can fix it by collapsing and then expanding the new module.
http://www.marcuscurtismusic.com/ Windows 10 ultimate, Sonar Platinum, AMD Phenom 2 x6 1075T processor 3.00 GHz, (6 cores) 8 gigs of Ram, Audio interfaces=VS-100, Pod X3 live pro, Boss GT-100, Boss GP10 Midi Controllers=Edirol PCR 800, roland GR-55. Ozone 7, Podfarm, Th2 Full Version, Melda, True Pianos Full Version, and a whole bunch of free VST plugins which can be found through my site.
|
Funkybot
Max Output Level: -75 dBFS
- Total Posts : 796
- Joined: 2003/11/06 16:32:13
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 23:21:49
(permalink)
So far I've had:
1. A mixer docked at the bottom where X2 refused to allow me to resize the dock. The double arrow icon just refused to appear. I had to close and reopen the project.
2. Fx Chains confusing or doubling parameters. This happened by loading Slate VTM - assigning controls to several knobs, then loading VCC, reassigning some VTM knobs for use in VCC. Result: somehow, "Process" in VTM got linked to "Drive" in VCC, where both parameters would be effected by moving the knob.
Intel i7 4790k, ASUS Z97-A mobo, 16GB Kingston DDR3 RAM, Windows 10 x64, UAD2 Duo, RME Fireface 800, Sonar X1/X2 Producer
|
yorolpal
Max Output Level: 0 dBFS
- Total Posts : 13829
- Joined: 2003/11/20 11:50:37
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 23:31:11
(permalink)
While Left Click drag to select a range of measures/tracks seems to be working OK. Right Click "Lasso" does not work at all. Rather it selects an entire track and not just the "lassoed" selection. Or is this me?
|
Bill Jackson [Cakewalk]
Administrator
- Total Posts : 519
- Joined: 2007/07/11 16:44:27
- Location: Boston, MA
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 23:38:50
(permalink)
Hi guys, I just want to take an opportunity to remind you that any issue that is reproducible with steps should be reported here: http://www.cakewalk.com/support/contact/problemreport.aspx This will help us prioritize and also make absolutely sure we know about it, as it's sometimes hard to sift through forum threads. In addition: whenever a crash offers to send info to us, please say yes. This really helps us get to the bottom of stuff we can't make happen in-house. Thanks.
Bill Jackson Product Manager Cakewalk
|
Ham N Egz
Max Output Level: 0 dBFS
- Total Posts : 15161
- Joined: 2005/01/21 14:27:49
- Location: Arpadhon
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/23 23:54:40
(permalink)
Bill Jackson [Cakewalk
]
Hi guys,
I just want to take an opportunity to remind you that any issue that is reproducible with steps should be reported here: http://www.cakewalk.com/support/contact/problemreport.aspx
This will help us prioritize and also make absolutely sure we know about it, as it's sometimes hard to sift through forum threads.
In addition: whenever a crash offers to send info to us, please say yes. This really helps us get to the bottom of stuff we can't make happen in-house.
Thanks.
Unless, as in my case, the crash reporting routine crashes,,, the progress bar goes about 3/4 way then the process freezes...(sigh)
Green Acres is the place to be I dont twitter, facebook, snapchat, instagram,linkedin,tumble,pinterest,flick, blah blah,lets have an old fashioned conversation!
|
QuadCore
Max Output Level: -86 dBFS
- Total Posts : 219
- Joined: 2009/05/04 15:50:49
- Status: offline
Re:Report your X2 (running, not install) problems here.
2012/09/24 00:01:55
(permalink)
The first two projects [originally X1] that i opened and began working on crashed to a frozen white screen every ten minutes or so. I was almost always while the song was stopped and i was doing some sort of editing i do all the time in X1 without a problem. These are fairly large projects with .cwp file size of 2,500 or more, and plenty of plugs - not that that should make any difference...
|