I ran as administrator. I did re-set and re-scan of Vsts. I received an email from Melodyne today that advised to reinstall Melodyne in 64 bit. and to make sure the path was correct. I did that, reinstalling Melodyne in 64 bit only. The only thing that I didn't do is disable my virus scanner before install. I am going to do that now. I've tried everything that I know of.

paulclaro
 The only thing I do not understand is in the folder C:program files/common files/vst3/celemony/melodyne is Melodyne.vst3.

This is the binary for the VST3 plug-in. If it were a VST2 it would be named Melodyne.dll but VST3 plug-ins use the .vst3 extension.
 

paulclaro
I am not seeing the Melodyne singletrack.exe and MelodyneReWireDevice.dll is in the VST2folder. I have created a path to both folders. 

This is correct. In a 64bit installation, these files should only exist in "C:\Program Files\Celemony\Melodyne Singletrack". They have nothing to do with VST2 and should not be in the VST scan path.
 
 

paulclaro
 I have a scan path to C:\Prog Files\common files\vst2 and vst3 as well as C:\Program files\cakewalk\vstplugins
and C:\program files\cakewalk\sonarx1 studio.

Not sure about this scan path. Is "C:\Prog Files" really "C:\Program Files" or did you create a "C:\Prog Files"? The VST3 specification requires 64bit VST3 plug-ins be installed under the "C:\Program Files\Common Files\VST3" directory. What is in "C:\Prog Files\common files\vst2"? Adding "C:\program files\cakewalk\sonarx1 studio" to the VST scan path is not a good idea. The files in this folder have nothing to do with VST plug-ins.
 

Don't scan the "C:\Program Files\Celemony" directory, there is nothing in there for the VST scanner.
 
Try running the standalone "C:\Program Files\Celemony\Melodyne singletrack\Melodyne singletrack.exe".

Believe or not, this is progress.
 
I have read this error is almost always a MS C++ redistribution library problem. Download the latest library from Microsoft.

Did the update. Should I uninstall and reinstall Melodyne?

I'll give it a shot.

Install the version of Melodyne that goes with the version of SONAR being installed. In my case, I have not installed a 32bit version of SONAR in some time.

I am getting the same application error when reinstallation was reinstalling Rapture. "the application was unable to start correctly (0xc000007b).

I don't think I downloaded the latest library. I think I downloaded 2011. I am going to download 2013 and try the process again. 

It sounds like there are still unresolved issues with the MS libs on this machine. I would suggest calling Cakewalk tech support to sort this out.

paulclaro
I am getting the same application error when reinstallation was reinstalling Rapture. "the application was unable to start correctly (0xc000007b).

Thinking about this, I believe Rapture is the last part of the SONAR install, so is it possible the Melodyne installer generated this error. Either way, I am pretty sure, this is a MS lib problem.

I can't remember which plug I had an issue with but I had to reinstall a bunch of libraries, like 2005, 2008, 2010 etc.
Possibly you have a corruption in one of the older ones so Melodyne believes it's installed, but then it fails upon loading. Maybe they would be able to tell you which dependencies Melodyne has, normally these libraries are installed when you install the program, provided they aren't already.

I've spent more time configuring X3 than I have recording so far. In addition to plug ins that are no longer available, from Sonar 1 studio. I"ve yet to figure that one out yet.

Yes, at least in 2009 this was the case.

I think scook is on the right track with the c++ redistributables.   From what I was able to Google, the most likely cause is a mismatch between 32bit and 64bit dlls.  These are a few of the results, though completely unrelated to SONAR and Melodyne.  But some of the same general ideas do seem to keep coming up.
 
***************
The problem was due to 32/64-bit mismatches of various system dlls required by Visual studio. Somehow the dlls it needs got replaced by 64-bit versions that it couldn’t load.   Replacing the dlls mentioned below from a machine that is working solves the problem:  
c:\Windows\SysWOW64\msvcp100.dll  
c:\Windows\SysWOW64\msvcp100d.dll  
c:\Windows\SysWOW64\msvcr100.dll  
c:\Windows\SysWOW64\msvcr100_clr0400.dll  
c:\Windows\SysWOW64\msvcr100d.dll
 
***************
This error message may occur on 64 bit operating systems when the Microsoft Visual C++ Redistributable Package is not properly configured.  
1. Replace these files. mfc100.dll, mfc100u.dll, msvcr100.dll, msvcp100.dll and msvcr100_clr0400.dll  They can be found at http://www.microsoft.com/en-us/download/details.aspx?id...  Please save these files to any location on your PC;  
2. Please reboot your computer in Safe Mode  - Restart the computer;  - Press the "F8" key (several times before Microsoft Windows begins to load; you need to press "F8" until you will be displayed a text menu;  - Select "SAFE MODE";  Note: for Windows 8, you can hold the Shift key while going to Power Off and clicking on Restart option
3. Access C:\Windows\System32;  
4. Locate the 5 files you have downloaded and extracted;  
5. Next, copy all those files to C:\Windows\System32 replacing the current ones;  
6. Reboot in normal mode
 
***************
There may be multiple reasons as to why you might receive 0xc00007b error when trying to run an application on a windows machine. 0xc000007b error usually comes from mixing up 32bit environment with 64bit one. For example 32bit application loads a 64bit dll causing 0xc000007b error.  
 
Solution 1   In most cases it's .NET framework causing issues. This can easily fixed by re-installing latest .NET framework from
 
Solution 2   Re-install the application that you are trying to run. 
 
Solution 3   Running the application as an administrator could fix this error. Right click on the program shortcut or program .exe file, then click on Properties, and on the Compatibility tab. Check the Run this program as an administrator box, and click on OK  
 
Solution 4   Restart your computer as some applications require restart after installation to function properly.
 
Solution 5   Run Windows update as it can provide application fixes and updates. Furthermore it installs missing drivers and updates the outdated ones like graphic card drivers.
 
Solution 6   manually update the application if possible.  
 
Solution 7   re-install Microsoft Visual C++  
 
Solution 8  re-install DirectX
 
Solution 9   Many times hard disk problems can be repaired using the chkdsk command.
 
Solution 10   This solution only works for a 64-bit system. It requires replacing files is system32 directory so be careful. Only attempt this solution if you are confident and if other solutions have failed. When Microsoft Visual C++ Redistributable Package is not properly configured it may cause 0xc00007b error. Firstly download the zip file and decompress it. Reboot in safe mode and go to C:\Windows\System32. copy all files included in the zip package (mfc100.dll, mfc100u.dll, msvcr100.dll, msvcp100.dll and msvcr100_clr0400.dll) to C:\Windows\System32 replacing the current ones. After that reboot in normal mode.   If all the solutions above haven't worked i would consider backing up data and performing a clean install of windows.