Helpful ReplyRe-wire option gone!! Melodyne issue

Page: < 1234 > Showing page 3 of 4
Author
Post
Essentials Only Full Version
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 11:36:15 (permalink)
I'm not sure what this means... "REPLACE the dlls from a machine that is working." What is meant by replace?
 
stevec
 
***************
  Replacing the dlls mentioned below from a machine that is working solves the problem:  
c:\Windows\SysWOW64\msvcp100.dll  
c:\Windows\SysWOW64\msvcp100d.dll  
c:\Windows\SysWOW64\msvcr100.dll  
c:\Windows\SysWOW64\msvcr100_clr0400.dll  
c:\Windows\SysWOW64\msvcr100d.dll
 
 





Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#61
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 11:50:39 (permalink)
I am still not at a computer but will be later on this evening. The reason for the replacement in safe mode is those files cannot be overwritten when in use. If you are not familiar with using a command prompt, please take a break from this as I realize your frustration level is high. If those files are the cause, uninstalls/reinstalls may be futile. Once I get back in front of a computer I can elaborate on the post you made above. I did not see and direction of "how" beyond hitting F8. I need to reread this thread and be at a computer.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#62
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 11:52:56 (permalink)
Thanks. 

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#63
stevec
Max Output Level: 0 dBFS
  • Total Posts : 11546
  • Joined: 2003/11/04 15:05:54
  • Location: Parkesburg, PA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 17:47:01 (permalink)
Yeah, as mettelus mentioned, the F8 key typically interrupts the Windows load process and would allow you to boot into Safe Mode.   And that allows certain system level files to be manipulated that would otherwise be "locked" when Windows is running normally.
 
That particular solution does refer to having the set of files available from a working machine in order to copy them over while in Safe Mode.   However, I believe those same files may also be part of a Microsoft download mentioned in an earlier solution.
 
Again, these were completely unrelated to SONAR, but the symptoms are all too similar!
 

SteveC
https://soundcloud.com/steve-cocchi
http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163
 
SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors;
Focusrite 18i6 (ASIO);
Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
 
#64
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 18:51:22 (permalink)
I am running a complete ChkDsk now. If this does not solve the problem I am going to try below. I copied these files from my Desktop PC and I am goint to replace on my laptop that has Cakewalk on it...except there are two files that I can not find on my Desktop:
c:\Windows\SysWOW64\msvcp100d.dll 
c:\Windows\SysWOW64\msvcr100d.dll
 I am hoping that this does not do any damage to any other files on my laptop. I am not too educated in this. I know the basics, but when it comes to dlls and such I'm pretty much wingin it. 
 
Replacing the dlls mentioned below from a machine that is working solves the problem:  
c:\Windows\SysWOW64\msvcp100.dll  
c:\Windows\SysWOW64\msvcp100d.dll  
c:\Windows\SysWOW64\msvcr100.dll  
c:\Windows\SysWOW64\msvcr100_clr0400.dll  
c:\Windows\SysWOW64\msvcr100d.dll

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#65
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 21:25:34 (permalink)
Okay, I am finally on my machine again. Did you get Melodyne running? I just wanted to clarify this based on the above post (I caught "Replacing the dlls mentioned below from a machine that is working solves the problem" but wanted to make sure).
 
Also of note - I do not have the two files you mentioned above on my machine either, specifically
"c:\Windows\SysWOW64\msvcp100d.dll and
c:\Windows\SysWOW64\msvcr100d.dll"
I only have the other three, and Melodyne runs fine for me.
 
Just for your clarification... the dll (dynamic link library) files in the "runtime libraries" are files to save programmers time by having pre-defined "building blocks" in place (provided by Microsoft) to allow them to code software more efficiently (and universally). Programs relying on these (and many do) will not run with these files missing since they contain code that actually makes a program "complete" (and smaller for distribution). Most software installers will verify these are in place when loaded. These are universal files, so they will not damage your laptop.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#66
stevec
Max Output Level: 0 dBFS
  • Total Posts : 11546
  • Joined: 2003/11/04 15:05:54
  • Location: Parkesburg, PA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 21:55:37 (permalink)
paulclaro
 
Replacing the dlls mentioned below from a machine that is working solves the problem:  
c:\Windows\SysWOW64\msvcp100.dll  
c:\Windows\SysWOW64\msvcp100d.dll  
c:\Windows\SysWOW64\msvcr100.dll  
c:\Windows\SysWOW64\msvcr100_clr0400.dll  
c:\Windows\SysWOW64\msvcr100d.dll



So... that did resolve the issue for you?
 

SteveC
https://soundcloud.com/steve-cocchi
http://www.soundclick.com/bands/pagemusic.cfm?bandID=39163
 
SONAR Platinum x64, Intel Q9300 (2.5Ghz), Asus P5N-D, Win7 x64 SP1, 8GB RAM, 1TB internal + ESATA + USB Backup HDDs, ATI Radeon HD5450 1GB RAM + dual ViewSonic VA2431wm Monitors;
Focusrite 18i6 (ASIO);
Komplete 9, Melodyne Studio 4, Ozone 7 Advanced, Rapture Pro, GPO5, Valhalla Plate, MJUC comp, MDynamic EQ, lots of other freebie VST plugins, synths and Kontakt libraries
 
#67
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 22:02:30 (permalink)
I am runnin dskchk right now. It's taking awfully long. If that does not fix it; I saved the above files. I am not sure, however how to replace them on my computer that has cakewalk on it. In addition, do I have to do this in safe mode?

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#68
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 22:27:46 (permalink)
I just tested doing this with the computer running, and moved a copy of those files from my desktop into the c:\Windows\SysWOW64\ directory. I said yes to replacing all three, and it then warned me I needed to do this as administrator. I simply replied "Yes" to this and it overwrote all three files.
 
As long as no program is running which uses those files, this should be all you have to do. If something is running using those files, you should get an "access denied" that you cannot override (meaning you would need to launch Windows in safe mode). This is not likely, but if you do need to run in safe mode, you can reboot the computer and hold the F8 key down as each screen in the boot up comes up (the one just prior to the "Windows" logo will trigger a prompt to boot into safe mode). Safe mode looks like Windows (and functions the same), but will use generic drivers, so your screen resolution will be funky. You can copy those files and reboot normally, but will need to rearrange your desktop afterwards (the screen resolution will change placement of things, but delete nothing - more a nuisance).
 
Try the copying in normal Windows mode first though (best to do right after a system boot); and even if they do copy for you, please reboot afterwards before checking Melodyne again.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#69
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/01 23:45:03 (permalink)
OK just did a dskchk and copied the files into SysWOW 64 directory. I am going to re-boot. I am going to check Melodyne again in the AM. If it still does not open in Cakewalk I'm going to uninstall and run Melodyne again. If I have a problem after this, I'm done  and I'll have to stick with Vvocal. It's more of a mission I'm on now, than anything else.  We shall see.....

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#70
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 12:02:11 (permalink)
stevec
Still having problems. I replaced the following dll's. bit In another post I believe I was told to replace them in the C:\Window\SysWOW64 location and below I am told to replace them in the C:\Windows\System32. Where should these files be replaced? See Below Solution 10. Do I have to do this in safe mode as well.
 
 
 
 
***************
This error message may occur on 64 bit operating systems when the Microsoft Visual C++ Redistributable Package is not properly configured.  
1. Replace these files. mfc100.dll, mfc100u.dll, msvcr100.dll, msvcp100.dll and msvcr100_clr0400.dll  They can be found at http://www.microsoft.com/en-us/download/details.aspx?id...  Please save these files to any location on your PC;  
2. Please reboot your computer in Safe Mode  - Restart the computer;  - Press the "F8" key (several times before Microsoft Windows begins to load; you need to press "F8" until you will be displayed a text menu;  - Select "SAFE MODE";  Note: for Windows 8, you can hold the Shift key while going to Power Off and clicking on Restart option
3. Access C:\Windows\System32;  
4. Locate the 5 files you have downloaded and extracted;  
5. Next, copy all those files to C:\Windows\System32 replacing the current ones;  
6. Reboot in normal mode
 
 
Solution 10   This solution only works for a 64-bit system. It requires replacing files is system32 directory so be careful. Only attempt this solution if you are confident and if other solutions have failed. When Microsoft Visual C++ Redistributable Package is not properly configured it may cause 0xc00007b error. Firstly download the zip file and decompress it. Reboot in safe mode and go to C:\Windows\System32. copy all files included in the zip package (mfc100.dll, mfc100u.dll, msvcr100.dll, msvcp100.dll and msvcr100_clr0400.dll) to C:\Windows\System32 replacing the current ones. After that reboot in normal mode.   If all the solutions above haven't worked i would consider backing up data and performing a clean install of windows.
 





Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#71
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 16:13:55 (permalink)
Just got off the phone with Cakewalk Tech support. They had me uninstall Melodyne and reinstall with a couple of changes to the install process. Still doesn't work. They advised me to do a clean install of Sonar X3 and gave me a couple of registry keys to delete. Getting a liiiiitttle frustrated here.

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#72
Sanderxpander
Max Output Level: -36.5 dBFS
  • Total Posts : 3873
  • Joined: 2013/09/30 10:08:24
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 16:22:27 (permalink)
I have to admit it's a complete mystery to me too. Nobody has had this fail so spectacularly so far. I appreciate your efforts to communicate what you've tried. Hopefully it will help someone else.
#73
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 16:54:08 (permalink)
Well, I am king of the Spectacular Fail. I will keep you posted.
Thanks for all the help. This is definitely the place to be if you've got questions. I've gotten a lot of suggestions and assistance. I'm on a mission now.

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#74
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 19:21:03 (permalink)
I'm done. I did a complete clean install of Sonar X3 producer. I was advised by Cakewalk tech support to back up my registry and delete some registry keys to do the clean install. Again, when I was re installing the software 0x00007b error came up. Still no Melodyne. I replied to tech support email and I will call them one last time tomorrow. It appears no one can figure this one out.

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#75
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 19:30:01 (permalink)
Quick question... "0x00007b" as in a BSOD (Blue Screen of Death)?

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#76
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 20:14:25 (permalink)
No not BSOD error message stating "application was unable to start correctly 0x00007b) This comes up right after the rapture install. Same problem as earlier.  
mettelus
Quick question... "0x00007b" as in a BSOD (Blue Screen of Death)?





Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#77
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 20:27:17 (permalink)
Just for sanity sake here. I am assuming you downloaded the X3 Producer files? Please verify the MD5 hash (thumbprints) from the X3 Producer installation page (scroll to the bottom of the page and click the Producer link) versus the ones on your machine. Specifically these 4 files (copied and pasted from that page, which apply to the Producer version only):
 
02_SONAR_X3_Producer.part1.exe  fe5d24de89c0d2bf7c8ef0fff85e0abd 
02_SONAR_X3_Producer.part2.exe  5128ef47dada335c196e179c596f32f0 
02_SONAR_X3_Producer.part3.exe  5c27dbeb9fcf17151e1ccb6ae9f1f542 
02_SONAR_X3_Producer.part4.exe  d822bc697796d90c5606193e027f89dd 
 
I use a free program called "FastSum" which calculates the MD5 hash values from files on your machine (there are other programs which will also calculate MD5 values). What this does is verify that the files on your machine are identical to those on the server they came from (i.e. the MD5 values from your downloads match the server).
 
Your issue is so off the wall that it is borderline crazy, but I had a download error with X2 which produced similar results. The X3 Producer installation should install all files needed to run Melodyne Essential, so I am concerned that one of the download files may be corrupt, and this is an easy thing to check quickly.

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#78
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/02 21:23:56 (permalink)
Have you tested your RAM? I had INSANE installation problems on a Mac once due to a RAM stick issue. Had to test from the CLI, otherwise a RAM tester would need to use RAM.

If it's any consolation, you in the running for "weirdest problem so far of 2014."

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#79
Atsuko
Max Output Level: -83 dBFS
  • Total Posts : 365
  • Joined: 2012/09/21 18:17:28
  • Location: Rio de Janeiro, Brazil
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/03 12:18:05 (permalink)
+1 to mettelus, I'd try to download the installation files again.

Desktop Intel I7 12GB RAM Win 10 64bit - Focusrite Scarlett 18i8 2nd gen - Roland A-300 PRO - Yamaha HS50M speakers - Sonar Platinum/CbB - Samplitude Pro X3 - Studio One 4 - Melodyne 4 Studio - Ozone 8 Adv - Neutron 2 Adv - RX7 Adv - ARC2 // Notebook Dell I7 8GB RAM Win 10 64bit
#80
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/03 16:55:34 (permalink)
I spoke to Cakewalk Tech support once again. Thanks for all the advise, but I think I'm in over my head here. Cakewalk tech is going to set up a remote session to look into what's going on, on Monday. They need to connect to my system and take a closer look. I'll keep you all posted. Watch it be something stupid that I'm unwittingly doing wrong.....
 

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#81
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/07 15:22:06 (permalink)
Well, Cakewalk Tech support was more than willing to help. They remotely connected to my system. Tried as he might, he just couldn't solve the problem. Still getting xc000007B error. They need to escalate the problem and get back to me. To be continued............

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#82
Sanderxpander
Max Output Level: -36.5 dBFS
  • Total Posts : 3873
  • Joined: 2013/09/30 10:08:24
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/07 16:59:37 (permalink)
Geez. That's the nicest service I have ever witnessed but super frustrating at the same time.
#83
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/15 14:40:09 (permalink)
Ok, here is the info that cake walk gave me from Melodyne. They advised me to add Celemony Singletrack Licenser.exe to the Data Execution Prevention section in the Performance section of my system settings. Not sure what this means, but I'm gonna give it a shot as soon as I get back to my PC. 

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#84
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/16 13:35:32 (permalink)
Frustrated as hell. Still can not get Melodyne running except for 32bit stand alone.
I'm lost.

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#85
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/16 14:39:24 (permalink)
I apologize for being fascinated with someone else's misery, but this is a real cliff-hanger/mystery. It's obvious that the OP has done everything possible, been completely civil the whole time despite massive frustration, and of course, the Cakewalk community is doing everything possible to help...
 
Just out of curiosity, did you ever check the RAM?

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#86
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/16 16:14:12 (permalink)
Not yet. I'll have to check the RAM as soon as I have access. All I use the Laptop for is Sonar. I can't see that as being a problem, but I will check anyway. Thanx

Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#87
paulclaro
Max Output Level: -86 dBFS
  • Total Posts : 236
  • Joined: 2010/12/19 20:55:09
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/16 16:19:29 (permalink)
I could try this, but I have uninstalled and installed X3 producer 3 times already.
mettelus
Just for sanity sake here. I am assuming you downloaded the X3 Producer files? Please verify the MD5 hash (thumbprints) from the X3 Producer installation page (scroll to the bottom of the page and click the Producer link) versus the ones on your machine. Specifically these 4 files (copied and pasted from that page, which apply to the Producer version only):
 
02_SONAR_X3_Producer.part1.exe  fe5d24de89c0d2bf7c8ef0fff85e0abd 
02_SONAR_X3_Producer.part2.exe  5128ef47dada335c196e179c596f32f0 
02_SONAR_X3_Producer.part3.exe  5c27dbeb9fcf17151e1ccb6ae9f1f542 
02_SONAR_X3_Producer.part4.exe  d822bc697796d90c5606193e027f89dd 
 
I use a free program called "FastSum" which calculates the MD5 hash values from files on your machine (there are other programs which will also calculate MD5 values). What this does is verify that the files on your machine are identical to those on the server they came from (i.e. the MD5 values from your downloads match the server).
 
Your issue is so off the wall that it is borderline crazy, but I had a download error with X2 which produced similar results. The X3 Producer installation should install all files needed to run Melodyne Essential, so I am concerned that one of the download files may be corrupt, and this is an easy thing to check quickly.





Win 7 Dell intel Core i3, 2.40 ghz, 6gb RAM, 64bit OS, Sonar X3-Producer, M-Audio Fast Track, Nady SMPS-1X Condensor Mic.
#88
mettelus
Max Output Level: -22 dBFS
  • Total Posts : 5321
  • Joined: 2005/08/05 03:19:25
  • Location: Maryland, USA
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/17 00:53:26 (permalink)
If you still have your downloaded files, please verify that the MD5 hashes are correct (simplest check). I kept re-installing X2 from the same download, and one of my files was bad, so the re-installs I did, could not fix anything.
post edited by mettelus - 2014/04/17 18:35:02

ASUS ROG Maximus X Hero (Wi-Fi AC), i7-8700k, 16GB RAM, GTX-1070Ti, Win 10 Pro, Saffire PRO 24 DSP, A-300 PRO, plus numerous gadgets and gizmos that make or manipulate sound in some way.
#89
Anderton
Max Output Level: 0 dBFS
  • Total Posts : 14070
  • Joined: 2003/11/06 14:02:03
  • Status: offline
Re: Re-wire option gone!! Melodyne issue 2014/04/17 14:03:32 (permalink)
paulclaro
Not yet. I'll have to check the RAM as soon as I have access. All I use the Laptop for is Sonar. I can't see that as being a problem, but I will check anyway. Thanx




I learned much to my chagrin that you can never trust anything that co-habitates with a microprocessor.

The first 3 books in "The Musician's Guide to Home Recording" series are available from Hal Leonard and http://www.reverb.com. Listen to my music on http://www.YouTube.com/thecraiganderton, and visit http://www.craiganderton.com. Thanks!
#90
Page: < 1234 > Showing page 3 of 4
Jump to:
© 2025 APG vNext Commercial Version 5.1