Helpful ReplyTascam FW 1884 works in win 10 X64

Page: 123 > Showing page 1 of 3
Author
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
2015/11/20 19:15:38 (permalink)

Tascam FW 1884 works in win 10 X64

As the title says, I have the Tascam FW 1884 working (so far) as a motorized volume (and hopefully more as I learn this thing) fader with no problems, using the setup described in http://deeringamps.com/fw1884/sonarx_fw1884.htm
And everything went smoother than I would ever expect
There is hope for you guys and girls that still uses this item, and want to upgrade / migrate to Win 10 (X64).
Looking forwards to learning this beast
All the best.
http://deeringamps.com/fw1884/sonarx_fw1884.htm

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#1
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 08:50:10 (permalink)
So navigating in Device Manager and installing the "Legacy" FW Driver in Win 10 is not as problematic as Win 8.1?
Glad you found the tutorial useful.
 
Tom

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#2
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 10:36:14 (permalink)
Thanks for making the guide that let me do it so easily, Tom I installed everything in compatibility mode, and as administrator. After rebooting, I was up and crawling (probably a long time until I can run with this one
I had one issue, when I (do not ask me why) turned the FW 1884 off, and on again when the pc was turned on, and windows crashed. Rebooted, and all is fine again.
Thanks again, and all the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#3
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 10:46:52 (permalink)
Zargg71
Thanks for making the guide that let me do it so easily, Tom I installed everything in compatibility mode, and as administrator. After rebooting, I was up and crawling (probably a long time until I can run with this one
I had one issue, when I (do not ask me why) turned the FW 1884 off, and on again when the pc was turned on, and windows crashed. Rebooted, and all is fine again.
Thanks again, and all the best.


Hmmmmmm under Win 7 I can turn my unit off/on with no crashes.
 
Does this happen every time? For me that would a bit of a bummer. I leave my DAW on 24/7 but flip off power to 
1) video monitor
2) powered audio monitors
3) RME
4) FW-1884
 
#4
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 11:06:22 (permalink)
I have not checked, Ed. IIRC windows said that something went wrong, and collected some data, then rebooted.
Will try again, and let you know. 

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#5
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 11:31:24 (permalink)
I tried to turn off - on the FW 1884 (3 times), when pc is turned on, and it crashes each time. Says something like "IRQL less or more", when collecting data, so there is probably something wonky in the driver / operator department.
Will try to retrace my installation tomorrow, to see if there is something I could have done wrong. Maybe do another installation, and this time make notes... 
All the best. 

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#6
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/21 12:13:34 (permalink)
The "Legacy" driver solves this problem (crashes) in Win 7.
Do you have a TI chipset for the firewire?
There's a tool for checking that on my web page, although I don't know if it works in Win 10.
Without a doubt, if re-booting the FW crashes Windows, that's a showstopper!
 
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#7
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 11:56:09 (permalink)
I tried again today to turn off and on the FW 1884, with the same results as I got yesterday. It could be down to my FW card. It is a ST Lab FW card with TI chip, and was the cheapest I could find in a store near me that day.
It is not a showstopper for me, that I cannot turn it off / on when windows is running, so I will try to learn it some more, before I (maybe) get another FW card, that is known to work. 
Will report back after playing some more with it.
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#8
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 12:18:49 (permalink)
Did you run the OCHI tool from the web site?
Curious for 2 reasons; does it work in Win 10 and verifying you have the TI chipset.
You saw the TI logo on the chip? It looks like the outline of the State of Texas...
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#9
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 12:35:34 (permalink)
DeeringAmps
Did you run the OCHI tool from the web site?
Curious for 2 reasons; does it work in Win 10 and verifying you have the TI chipset.
You saw the TI logo on the chip? It looks like the outline of the State of Texas...
T


Is there a state of Texas in Norway?
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sorry, I had to do it.
#10
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 13:09:31 (permalink)
Shame on you!
 


Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#11
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 13:48:01 (permalink)
There is no place (I know of) that is called Texas Norway, Ed 
I think Tom is correct in suggesting that my FW card is from the very outskirts of Texas... 
To be honest, I (for once) trusted the sales person that sold me the card. Shame on me 
The tool is working somewhat in Win 10. It only states 2 of my 16 Gb of RAM, and does not recognize OS. It also does not find any TI FW card, so I will have to find one myself
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#12
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 14:12:35 (permalink)
You guys would not happen to be able to recommend a card for a fellow FW 1884 user?
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#13
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 14:41:51 (permalink)
Zargg71
You guys would not happen to be able to recommend a card for a fellow FW 1884 user?
All the best.


http://forum.cakewalk.com/FindPost/3318590
 
I believe that I used a Belkin with success before I went with an on-board FW. I don't think they are made anymore.
#14
daryl1968
Max Output Level: 0 dBFS
  • Total Posts : 10918
  • Joined: 2010/06/01 22:51:43
  • Location: Englishman in deepest, darkest Wales
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 15:03:31 (permalink)
Jumped from 7 to 10 here with an FW1082 and if anything I have more stability. I had to download and install the Legacy firewire driver but other than that it was easy peasy.
#15
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 15:35:37 (permalink)
bapu
 
http://forum.cakewalk.com/FindPost/3318590
 

Thanks, Ed. Will see what can be bought (affordable) and shipped to Norway.
Ebay or something, here I come...

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#16
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/22 15:36:37 (permalink)
daryl1968
Jumped from 7 to 10 here with an FW1082 and if anything I have more stability. I had to download and install the Legacy firewire driver but other than that it was easy peasy.

Thanks for sharing. Will probably have (even) more luck with an appropriate FW card.
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#17
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/23 09:25:24 (permalink)
Ken,
Check this thread
I have 3 PCIe cards, two different ADS and one Adaptec; all with the TI chipset.
Let me know if you hit a "brick wall".
 
T
post edited by DeeringAmps - 2015/11/23 09:43:30

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#18
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/23 10:38:11 (permalink)
Thanks for following up, Tom. I took Jim's advice, and went for an affordable Syba FW card, with TI chipset.
This one: http://www.ebay.com/itm/Syba-Low-Profile-PCIe-1394b-1394a-2B1A-Card-TI-Chipset-Extra-Regular-Bracket-/400825761465?hash=item5d5313beb9:g:rugAAOSwI-BWGxOD
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#19
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/24 09:46:33 (permalink)
Hopefully that should do the trick!
The ADS Pyro's and Adaptec's were the "bomb" at one time, but dried up.
It will be interesting to see if it was the card or the OS...
The last couple of days my FW(#1) has been a little "wonky".
I get into a session and she stops sending to Sonar.
In Sonar if I pull a fader, Mute, Solo, arm a track; all show up on the board, but she stops sending.
Have to re-boot windows to get her back. Gotta pull #2 out of mothballs and see what's what.
 
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#20
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/24 10:02:56 (permalink)
It seems that delivery will not be until 2. week of December ,so I will have to play with it as is for the time being.
Will report back when the new card is installed (and hopefully working). 
Hope your issues are of the mothball sort, and not more serious.
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#21
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/24 10:17:45 (permalink)
#1 has other "issues" as well.
I start it up, it falls out of "lock", let her idle a bit and re-boot her (the 1884) and all is well.
Until now of course when she stops "sending" to Sonar.
Well, stops sending period, I can't pullup the Tascam settings from her either.
X-Touch time?
Hope not, not yet anyway....
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#22
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/24 10:50:56 (permalink)
I personally am looking at X-Touch sometime in 2016.
 
I hope the X-Touch works with Mixbus 3.1 (which will be including controller capability). It's not a deal breaker but it would be nice to be 100% compat with SONAR, MB3, Studio Juan and Reaper.
#23
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/25 09:10:40 (permalink)
I pulled my Tranzport out of hibernation, just in case; 1884 #2 has some wonky keys.
Matt (RioJazz) must be "busy" with his X, he hasn't updated his thread lately.
Hope that's a "good" sign...
 
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#24
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/25 11:28:33 (permalink)
I hope to get a few years out of mine (even if I bought it used), and I hope so for you as well.
I am really enjoying having proper faders
Will probably enjoy it more with a proper FW card (and learning it properly).
All the best.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#25
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/28 19:13:14 (permalink)
Updated to Win 10.
 
I installed the "legacy" driver after the upgrade.
 
I have a TI chipset FW interface.
 
Bummer. I get the Win 10 crash if I power off and then power up again.
 
Because I leave my DAW on 24/7 but only fire up my RME & FW-1884 when I start SONAR (etc.) this has to make me rethink my process.
 
Hopefully once I get a Behringer X-Touch this will all go away.
#26
DeeringAmps
Max Output Level: -49.5 dBFS
  • Total Posts : 2593
  • Joined: 2005/10/03 10:29:25
  • Location: Seattle area
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/29 09:05:34 (permalink)
That's not good news...
Case closed?
I've been using the Tranzport the last few days, not exactly our beloved 1884, and the jog wheel has quit.
T

Tom Deering
Tascam FW-1884 User Resources Page
Firewire "Legacy" Tutorial, Service Manual, Schematic, and Service Bulletins

Win10x64
StudioCat Pro Studio Coffee Lake 8086k 32gb RAM

RME UFX (Audio)
Tascam FW-1884 (Control) in Win 10x64 Pro
#27
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/29 09:59:22 (permalink)
Yup, for now Tranzport is king.
 
I'm committed to Win 10 so sometime in 2016 X-touch may be the next big thing.
#28
bapu
Max Output Level: 0 dBFS
  • Total Posts : 85949
  • Joined: 2006/11/25 21:23:28
  • Location: Thousand Oaks, CA
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/29 14:21:59 (permalink)
For about $10US I am going to try this to "solve" the power up crash.
 
http://www.tascamforums.com/threads/stupid-fw-1884-stability-trick.2764/#post-17392
 
I really want to continue to work the way I do where I leave the DAW up 24/7 and then power up/down RME/FW-1884 on demand. Used to work in Win 7 flawlessly.
#29
Zargg
Max Output Level: 0 dBFS
  • Total Posts : 10501
  • Joined: 2014/09/28 04:20:14
  • Location: Norway
  • Status: offline
Re: Tascam FW 1884 works in win 10 X64 2015/11/29 15:40:33 (permalink)
That was a really strange solution, but hope it works. Still waiting for my FW card.

Ken Nilsen
Zargg
BBZ
Win 10 Pro X64, Cakewalk by Bandlab, SPlat X64, AMD AM3+ fx-8320, 16Gb RAM, RME Ucx (+ ARC), Tascam FW 1884, M-Audio Keystation 61es, *AKAI MPK Pro 25, *Softube Console1, Alesis DM6 USB, Maschine MkII
Laptop setup: Win 10 X64, i5 2.4ghz, 8gb RAM, 320gb 7200 RPM HD, Focusrite Solo, + *
 
#30
Page: 123 > Showing page 1 of 3
Jump to:
© 2018 APG vNext Commercial Version 5.1