ducatibruce2
Max Output Level: -79 dBFS
- Total Posts : 557
- Joined: 2008/10/05 09:04:31
- Location: Tasdemonia, Oz
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 08:51:26
(permalink)
mike_mccue
I'm banging my head against the wall with hardware MIDI controllers and Drum Maps.
re: http://forum.cakewalk.com/tm.aspx?m=1828702
I'm hoping I'm missing some very simple oversight on my part, but having exahausted everything I know to do and having no response from someone willing to replicate my observation I'm left to wonder if it's me or a bug.
Can someone take a look at drum maps and hardware.
thanks,
mike
Confirmed. Setup was input "All Inputs omni", output was to an external synth (RS7000) Inputs checked Roland JunoD, Roland HPD10 & Korg PadKontrol - plays/triggers fine if output set to midi output port; insert a straight through drum map & no play/trigger & No midi activity shows on the track midi activity bar. No problem in 8.3.1 XP Pro SP3 (32bit) edit to add: posted on original thread too
post edited by ducatibruce2 - 2009/09/24 08:53:22
S8.5.3PE & X1d P Exp & X2P, Q6600 @3Ghz, 4GB DDR2, XP SP3 With Knobs: 2 x Yamaha i88x mlan (ASIO), RS7000, Motif ESR, Roland SI24, VSynth XT, Varios, Fantom XR, JunoD, HPD10, Korg PadKontrol No knobs: P5, DimPro, Rapture, Z3ta+, IK stuff, ReCycle, Komplete8
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
.
post edited by Caa2 - 2017/04/12 13:08:01
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 09:09:08
(permalink)
Things that have been fixed in SONAR 8.5.1 is Instrument track! Now "open Instrumet control" of MIDI ch.. Timing and so on... the "bus setting" doesn't get change to" No BUS" anymore..as it did after you closed it in earlier versions of SONAR. Great Cakewalk! 
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
ducatibruce2
Max Output Level: -79 dBFS
- Total Posts : 557
- Joined: 2008/10/05 09:04:31
- Location: Tasdemonia, Oz
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 09:22:58
(permalink)
mike_mccue
Thanks Bruce.
No worries Mike - I should add I forgot to check the arpeggiator variation - but now I can confirm that too. You gonna do the Problem Reporter thang?
post edited by ducatibruce2 - 2009/09/24 09:25:25
S8.5.3PE & X1d P Exp & X2P, Q6600 @3Ghz, 4GB DDR2, XP SP3 With Knobs: 2 x Yamaha i88x mlan (ASIO), RS7000, Motif ESR, Roland SI24, VSynth XT, Varios, Fantom XR, JunoD, HPD10, Korg PadKontrol No knobs: P5, DimPro, Rapture, Z3ta+, IK stuff, ReCycle, Komplete8
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
.
post edited by Caa2 - 2017/04/12 13:08:19
|
ducatibruce2
Max Output Level: -79 dBFS
- Total Posts : 557
- Joined: 2008/10/05 09:04:31
- Location: Tasdemonia, Oz
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 09:57:03
(permalink)
Or is there some brand new and poorly documented option Or is it a fiendishly transparent attempt by a marketer to increase acceptance of the arpeggiator "I know if they use it they'll love it - even the arps are a cheat crowd"  CWBRN-1824 Inserting a Drum Map into a midi track prevents midi input being received/processed by Sonar. Once the Drum Map is inserted no midi input activity is displayed in Sonar and no midi data is output to the midi outport selected in the track. If the arpeggiator is turned on for the track midi data is processed normally (input displayed & data output at port).
The project subject to the issue saved in 8.5.1 (without the arpeggiator) & opened in 8.3.1 works as expected (input displayed & data output at port).
Tested with various input devices & various output synths.
S8.5.3PE & X1d P Exp & X2P, Q6600 @3Ghz, 4GB DDR2, XP SP3 With Knobs: 2 x Yamaha i88x mlan (ASIO), RS7000, Motif ESR, Roland SI24, VSynth XT, Varios, Fantom XR, JunoD, HPD10, Korg PadKontrol No knobs: P5, DimPro, Rapture, Z3ta+, IK stuff, ReCycle, Komplete8
|
The Maillard Reaction
Max Output Level: 0 dBFS
- Total Posts : 31918
- Joined: 2004/07/09 20:02:20
- Status: offline
.
post edited by Caa2 - 2017/04/12 13:08:30
|
seriousfun
Max Output Level: -78 dBFS
- Total Posts : 641
- Joined: 2003/11/07 19:29:54
- Location: SoCal
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:15:38
(permalink)
Freddie H
I don't think I really need to say this... you all know this by now...
System: I'm using VISTA 64bit Ultimate, SONAR 8.5.1, only the 64bit version..
BUG: Audio Snap2... Audio files in 64bit-format get locked in position after using Audio Snap2.
After activate AUDIO SNAP 2 with 64bit Audiofiles you can't move or copy the audiofile..You can only select it...
You need to save and close the project and open it again to be able to move or copy the audio-file...
Freddie H
 I don't know if this has been added to know bug list...
I Use the 64bit version....Will not state this anymore because I dont' use or have the 8.5.1 32bit version even installed!
The new Alias Factor Bit Decimator all dead 100% mix?
Volume comes back when lower the mix factor but no Bit-trashing FX.. Just clean sound...No bit trashing?
Loaded Presets... same there NO FX...= no bit trashing? just clean normal sound...
Please fix this Cakewalk...
AS2 - I noticed this last night - the lock goes on the clip after doing any AS-thing to the clip. Can't you just un-lock it (I'm not in front of my SONAR computer)? Alias Factor - Yes, this, and IIRC a few other of the P5 plugins, don't process audio (I had a few other bugs to work on before I took the time to report them).
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:20:52
(permalink)
I will check it out then.... what do you mean about un-lock it?
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:28:16
(permalink)
All 80% of my TEXT on my bugreport seems miss?  I reported 4-5 bugs on same bug report....? My BUG report! A lot of text missing? Please, and I hope Cakewalk READ THIS FORUM instead... Report: CWBRN-18xx
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
seriousfun
Max Output Level: -78 dBFS
- Total Posts : 641
- Joined: 2003/11/07 19:29:54
- Location: SoCal
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:30:15
(permalink)
Freddie H
I will check it out then.... what do you mean about un-lock it?
The clip lock appears on the clip - can you un-lock it in the clip properties (I'm talking out of my hat here, not in front of SONAR)?
|
gtgarner
Max Output Level: -73 dBFS
- Total Posts : 895
- Joined: 2005/07/21 14:36:13
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:31:19
(permalink)
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:32:34
(permalink)
I see I get it what you mean! Yeah I though soo too that it was that, that perhaps locked it to the position... need to check that out to so not AudioSnap 2 just activate "lock the clip to position"?
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Richard Fey
Max Output Level: -78 dBFS
- Total Posts : 650
- Joined: 2003/11/07 11:52:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:32:44
(permalink)
There's likely a character limit for the form. I would have filled out a new form for each. Probably you should do them over.
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:35:17
(permalink)
Gtgardner! =) Actually I don't have the time really.... But I work -12-14 hours a day.. 7 days a week almost...360 days a year...Way of life being a musician, you know * I do go to gym too of course. =)
post edited by Freddie H - 2009/09/24 12:37:36
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
brundlefly
Max Output Level: 0 dBFS
- Total Posts : 14250
- Joined: 2007/09/14 14:57:59
- Location: Manitou Spgs, Colorado
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:42:49
(permalink)
I hope a few other folks will pile on the with a report on the same problem! Mike, I tried to reproduce this with drum maps pointing to both hardware outs and soft synths, but it seemed to work normally. Maybe I need to re-check your configuration detail, but I'm not seeing a problem. I used a custom map to test, but I'm wondering if you have tried any of the generic maps included with SONAR...?
SONAR Platinum x64, 2x MOTU 2408/PCIe-424 (24-bit, 48kHz) Win10, I7-6700K @ 4.0GHz, 24GB DDR4, 2TB HDD, 32GB SSD Cache, GeForce GTX 750Ti, 2x 24" 16:10 IPS Monitors
|
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:49:57
(permalink)
@ Freddie - we can't give you accurate status info for 4+ issues in one report. they have been split up into multiple ones - you should have received an e-mail about this with separate CWBRN #'s I hope Cakewalk READ THIS FORUM instead. We do our best to stay on top of it, but the problem reporter is the only way to be 100% sure that we have been made aware of the issue.
There's likely a character limit for the form.
Certain fields are limited but they wont get cut off, the form won't allow you to provide more characters then we can take.
I would have filled out a new form for each.
This is the best way to do it.
post edited by Willy Jones [Cakewalk] - 2009/09/24 12:51:41
|
musec07
Max Output Level: -83 dBFS
- Total Posts : 390
- Joined: 2007/03/22 13:54:21
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 12:51:25
(permalink)
Freddie H
Gtgardner! =)
Actually I don't have the time really.... But I work -12-14 hours a day.. 7 days a week almost...360 days a year...Way of life being a musician, you know * I do go to gym too of course. =)
YO YO Freddie... I dig this. I have an email computer to my left... it beckons me with various inquiries... so I take a few seconds to reply... this gives folks the illusion I only sit here and wiat for the next email! HAHHAHA...
|
ducatibruce2
Max Output Level: -79 dBFS
- Total Posts : 557
- Joined: 2008/10/05 09:04:31
- Location: Tasdemonia, Oz
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 21:19:05
(permalink)
Just a bump & a note on CWBRN-1824 Drum Maps - I can record the midi but not hear
it during the record process. Playback is fine.
S8.5.3PE & X1d P Exp & X2P, Q6600 @3Ghz, 4GB DDR2, XP SP3 With Knobs: 2 x Yamaha i88x mlan (ASIO), RS7000, Motif ESR, Roland SI24, VSynth XT, Varios, Fantom XR, JunoD, HPD10, Korg PadKontrol No knobs: P5, DimPro, Rapture, Z3ta+, IK stuff, ReCycle, Komplete8
|
TagPass
Max Output Level: -90 dBFS
- Total Posts : 49
- Joined: 2006/08/16 00:27:02
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/24 22:26:56
(permalink)
Does this count as a bug: http://www.timpanella.com.edia/Track_Templates.wmv ? I can't save or rename a track template file or folder something that comes after "TTS-1" alphabetically. Support has been unable to replicate the problem, but something weird is definitely happening... check out the video!
|
Jose7822
Max Output Level: 0 dBFS
- Total Posts : 10031
- Joined: 2005/11/07 18:59:54
- Location: United States
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 03:38:00
(permalink)
Hmmm... I wasn't able to reproduce it either. I use Sonar64 under Vista64 though.
I inserted the TTS-1 on an empty project and saved it as a Track Template in Sonar. Named it TTS-2 and it immediately shows up. So I guess I can't reproduce it either. But then again, I'm in Vista64.
I tried :-(
Intel Q9400 2.66 GHz 8 GB of RAM @ 800 Mhz ATI Radeon HD 3650 Windows 7 Professional (SP1) x64 Cubase 6.03 x64 Sonar PE 8.5.3 x64 RME FireFace 400 Frontier Design Alpha Track Studio Logic VMK-188 Plus http://www.youtube.com/user/SonarHD
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 03:50:12
(permalink)
Willy Jones [Cakewalk
]
@ Freddie - we can't give you accurate status info for 4+ issues in one report. they have been split up into multiple ones - you should have received an e-mail about this with separate CWBRN #'s
I hope Cakewalk READ THIS FORUM instead.
We do our best to stay on top of it, but the problem reporter is the only way to be 100% sure that we have been made aware of the issue.
There's likely a character limit for the form.
Certain fields are limited but they wont get cut off, the form won't allow you to provide more characters then we can take.
I would have filled out a new form for each.
This is the best way to do it.
Thank you very much, Willy! I'm grateful and it's very kind of you to help me out! I see, I will split the reports in the future... I must say that; “Cakewalk support”, better support you can't find, world-class! Have a nice weekend! Best Regards Freddie
post edited by Freddie H - 2009/09/25 04:03:57
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 03:53:43
(permalink)
ducatibruce2
Just a bump & a note on CWBRN-1824 Drum Maps - I can record the midi but not hear
it during the record process. Playback is fine.
Hi my friend! =) I usually never use drum maps...but I will try that out today too.... I report back later! Have a nice weekend! Regards Freddie
post edited by Freddie H - 2009/09/25 04:04:21
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 04:02:02
(permalink)
musec07
Freddie H
Gtgardner! =)
Actually I don't have the time really.... But I work -12-14 hours a day.. 7 days a week almost...360 days a year...Way of life being a musician, you know * I do go to gym too of course. =)
YO YO Freddie...
I dig this.
I have an email computer to my left...
it beckons me with various inquiries...
so I take a few seconds to reply...
this gives folks the illusion I only sit here and wiat for the next email!
HAHHAHA...
Hi my friend! Yes, that's right!...great way to enjoy a break too, try to help & write on this FORUM with a cup a coffee. I have also an extra computer just for Internet and E-mail.. this is not my DAW computer I use on this FORUM.. My DAW computer doesn't have Internet.. only when I update the computer, I plug-in the Internet cable. Have a nice weekend! Regards Freddie
post edited by Freddie H - 2009/09/25 04:03:12
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 11:57:07
(permalink)
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Le_Dilettante
Max Output Level: -90 dBFS
- Total Posts : 13
- Joined: 2009/09/25 02:01:20
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/25 11:59:01
(permalink)
I have reported a problem that I and a few others seem to have with Session Drummer 3. Basically the outputs clip quite a bit with meters readings in between +10 and +20db and the faders on the mixer page don't do anything before they reach -80db, at which point the levels drop drastically.
This happens on all the kits, all the time, whether using SD3 as a single instrument or a multiout.
I've had this problem on two different setups, one running Windows Vista 64-bit with SONAR 8.5.1 32-bit, and Windows 7 with SONAR 8.5.1 32-bit.
Bug report: CWBRN-1836
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/28 15:13:00
(permalink)
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/28 15:26:19
(permalink)
Found a new bug in the new PX-64 Percussion Strip 7-stage multieffects processor.
It doesn't always remember the DELAY-settings when you LOAD the project you working on. How to fix this? Mute and then Un-mute the plugin don't solve this. The only thing that solve this is just move it to another-> , track--> "inser"-slot in Console-view and then <--- move it back again, to the original place, and now it works again! All settings are back as they was stored. I will send a report on this!
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/28 15:34:06
(permalink)
Found out new things. about "Reverse audio" bug with 64bit-wavefiles. The bug some of us has already reported!
The bug happens only with Stereo-files in 64bit waveformat! You can reverse audio with mono 64bit files... Hope Jose, Susan and other can concur all this with MONO-files, so its not just me, that it it works for?
I will repoprt this also, to try to help Cakewalk bug search...
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|
Freddie H
Max Output Level: -39 dBFS
- Total Posts : 3617
- Joined: 2007/09/21 06:07:40
- Status: offline
Re:***The Sonar 8.5.1 Master Bug Thread***
2009/09/28 15:58:21
(permalink)
All have been reported NOW!
-Highly developed spirits often encounter resistance from mediocre minds. -It really matters!
|