mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
First Impressions X1C - All good here at this stage.
I've been ruinning X1 for over an hour now without a white out or screen lock or this program has become unresponsive message. This is a first since I bought X1 in dec 2010.
This promises to be a worthwhile update at this very early stage of checking it out..
No Control bar disappearing as yet
ProChannel persists in its on/off state.
that's just my very earliest impressions. It's gone 4 am here on East Coast of Australia and I'm off to bed now. Looking forward to here how others fare with this new update. I reckon if it's making X1 work for me there shouldn't be anyone who can't get it to work. Unless of course by some irony of the universe it breaks X1 for everyone else. i'm just kidding.
All good here so far.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Starise
Max Output Level: -0.3 dBFS
- Total Posts : 7563
- Joined: 2007/04/07 17:23:02
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:14:40
(permalink)
I'm almost onboard,after I back a few things up just in case my system happens to be one in 1000 to disagree with it.
|
trimph1
Max Output Level: -12 dBFS
- Total Posts : 6348
- Joined: 2010/09/07 19:20:06
- Location: London ON
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:27:50
(permalink)
I'm going to sit on the fence for a bit..that is until the servers are not so jammed up as they appear to be right now...
@Mike...hope the thing works for you.
The space you have will always be exceeded in direct proportion to the amount of stuff you have...Thornton's Postulate. Bushpianos
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:31:14
(permalink)
trimph1
I'm going to sit on the fence for a bit..that is until the servers are not so jammed up as they appear to be right now...
@Mike...hope the thing works for you.
My download is at a "lightning fast" 74.0KB/sec so this could take a while.... or longer  . Poxy internet. Grum.
|
twoifbysea
Max Output Level: -84 dBFS
- Total Posts : 306
- Joined: 2011/04/27 21:26:23
- Location: Northern, CA
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:32:32
(permalink)
Super fast download. I expected it to be bogged down for a day or two.
System: HP Pavilion 450t. Windows 10 Home x64, Intel i7 870: 2.93 Ghz, 8G RAM - NVIDIA GeForce GT 610DAW: Sonar Platinum Audio Interface: Akai EIE ProMidi Controller: Presonus FaderPort Midi Keyboard: M-Audio Axiom 49 https://1208audio.com
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:40:28
(permalink)
I'm getting my full speed here Norfolk, UK. Having said that since I moved house 260KB/Sec is slower than I was used to.
|
Chregg
Max Output Level: -51.5 dBFS
- Total Posts : 2382
- Joined: 2010/02/22 06:14:27
- Location: Perth, Scotland
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 14:53:29
(permalink)
Independent Snap settings in the Piano Roll view
The Piano Roll view now has independent snap settings that can be used to override the global snap value.
still the same for me !!
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:00:33
(permalink)
Much still to find out but now that it continues to run I'll be able to work out what's under the bonnet (hood). still running after 2 hours.
I was going to go to bed but who cares. It's nearly time to get up anyway.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:04:24
(permalink)
|
codamedia
Max Output Level: -67 dBFS
- Total Posts : 1185
- Joined: 2005/01/24 09:58:10
- Location: Winnipeg Canada
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:06:46
(permalink)
Chregg
Independent Snap settings in the Piano Roll view
The Piano Roll view now has independent snap settings that can be used to override the global snap value.
still the same for me !!
I am assuming you are saying it is not working for you? If so, did you find the settings yet for PRV snap, and have you set them? 1: Open the PRV 2: On the upper right side is your snap settings. Click on it and the options will slide out. 3: Set them, and they should hold. I think if you don't set this (leave it collapsed) it takes on the global settings. I am not saying they work as I have not had a chance to try it yet. But that is where it is.
Don't fix it in the mix ... Fix it in the take!
Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video Laptop: Windows 7 Pro, i5, 8 Gig Ram Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
|
garrigus
Max Output Level: 0 dBFS
- Total Posts : 8599
- Joined: 2003/11/05 17:23:21
- Location: www.garrigus.com
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:14:49
(permalink)
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:16:34
(permalink)
Snap settings working great for me. It's hidden by default, but of you click on the little grid icon at the upper right of the Piano Roll view, you get the snap settings.
Note length is still in the Control Bar / HUD, but now has a "Last selected" option.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|
Chregg
Max Output Level: -51.5 dBFS
- Total Posts : 2382
- Joined: 2010/02/22 06:14:27
- Location: Perth, Scotland
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:20:26
(permalink)
I am assuming you are saying it is not working for you? If so, did you find the settings yet for PRV snap, and have you set them
yeah i've done all that make no difference, i have it a 1/8 notes just now and it still drawing in 1/4 notes ??
|
c5_convertible
Max Output Level: -88 dBFS
- Total Posts : 109
- Joined: 2011/01/31 09:37:37
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:22:52
(permalink)
Downloading now! (at 5MB/sec)... Here's to everything working right :)
|
M@ B
Max Output Level: -68 dBFS
- Total Posts : 1128
- Joined: 2010/01/05 20:54:54
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:24:25
(permalink)
I must have missed the announcement...
When was X1c released?
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:26:56
(permalink)
I saw it about 3 hours ago, downloaded it and have been running it ever since.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
codamedia
Max Output Level: -67 dBFS
- Total Posts : 1185
- Joined: 2005/01/24 09:58:10
- Location: Winnipeg Canada
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:28:35
(permalink)
Chregg
I am assuming you are saying it is not working for you? If so, did you find the settings yet for PRV snap, and have you set them
yeah i've done all that make no difference, i have it a 1/8 notes just now and it still drawing in 1/4 notes ??
Snap settings does not equal draw settings. Your snap settings adjust where the notes get placed, not the length of them. Your draw setting have always been independent and are found in the Control Bar / or HUD. As John points out above, this now has a "Last Selected" option.
post edited by codamedia - 2011/08/15 15:29:55
Don't fix it in the mix ... Fix it in the take!
Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video Laptop: Windows 7 Pro, i5, 8 Gig Ram Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
|
M@ B
Max Output Level: -68 dBFS
- Total Posts : 1128
- Joined: 2010/01/05 20:54:54
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:29:44
(permalink)
I had to go to see for myself... X1c is available for dnl'd. I thought for a minute that you guys had a finely orchestrated prank in the works. 
|
codamedia
Max Output Level: -67 dBFS
- Total Posts : 1185
- Joined: 2005/01/24 09:58:10
- Location: Winnipeg Canada
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:30:55
(permalink)
M@ B
I thought for a minute that you guys had a finely orchestrated prank in the works.
Time will tell if it's a prank or not 
Don't fix it in the mix ... Fix it in the take!
Desktop: Win 7 Pro 64 Bit , ASUS MB w/Intel Chipset, INTEL Q9300 Quad Core, 2.5 GHz, 8 GB RAM, ATI 5450 Video Laptop: Windows 7 Pro, i5, 8 Gig Ram Hardware: Presonus FP10 (Firepod), FaderPort, M-Audio Axiom 49, Mackie 1202 VLZ, POD X3 Live, Variax 600, etc... etc...
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:31:45
(permalink)
Working as well as X1b here, that's a good thing BTW.......
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:33:21
(permalink)
60.2 KB/sec...
Grum.
Yawn.
|
Chregg
Max Output Level: -51.5 dBFS
- Total Posts : 2382
- Joined: 2010/02/22 06:14:27
- Location: Perth, Scotland
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:35:29
(permalink)
Snap settings does not equal draw settings. Your snap settings adjust where the notes get placed, not the length of them.
lol got it now, sorted cheers lol
|
mudgel
Max Output Level: 0 dBFS
- Total Posts : 12010
- Joined: 2004/08/13 00:56:05
- Location: Linton Victoria (Near Ballarat)
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:36:22
(permalink)
Knowing how potentially important X1C was going to be for some of us I couldn't imagine starting a prank thread about it not only being available but it being good too.
Mike V. (MUDGEL) STUDIO: Win 10 Pro x64, SPlat & CbB x64, PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz. Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2. Monitors: Adam A7X, JBL 10” Sub. Audio I/O & DSP Server: DIGIGRID IOS & IOX. Screen: Raven MTi + 43" HD 4K TV Monitor. Keyboard Controller: Native Instruments Komplete Kontrol S88.
|
bz2838
Max Output Level: -83 dBFS
- Total Posts : 366
- Joined: 2010/10/16 14:44:50
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:46:56
(permalink)
|
StarTekh
Max Output Level: -55 dBFS
- Total Posts : 2007
- Joined: 2004/03/09 12:02:20
- Location: Montreal
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:47:05
(permalink)
Download was fast very fast.. patch is very good. good
move Cakewalk !! enjoy all
|
Dave Modisette
Max Output Level: 0 dBFS
- Total Posts : 11050
- Joined: 2003/11/13 22:12:55
- Location: Brandon, Florida
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 15:51:16
(permalink)
My disappearing icons when scrolling vertically issue seems to be fixed.
|
Grumbleweed_
Max Output Level: -72 dBFS
- Total Posts : 915
- Joined: 2007/11/01 09:13:58
- Location: Southampton, England
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 16:08:45
(permalink)
|
Chregg
Max Output Level: -51.5 dBFS
- Total Posts : 2382
- Joined: 2010/02/22 06:14:27
- Location: Perth, Scotland
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 16:14:43
(permalink)
my magnetic setting keep defaulting back to medium, every time i start a new session have to go to pref to set it to high again ???
|
FastBikerBoy
Forum Host
- Total Posts : 11326
- Joined: 2008/01/25 16:15:36
- Location: Watton, Norfolk, UK
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 16:18:27
(permalink)
Chregg
my magnetic setting keep defaulting back to medium, every time i start a new session have to go to pref to set it to high again ???
By session do you mean new project? I believe those settings are per-project so need to be saved in your template to stick.
|
John T
Max Output Level: -7.5 dBFS
- Total Posts : 6783
- Joined: 2006/06/12 10:24:39
- Status: offline
Re:First Impressions X1C - All good here at this stage.
2011/08/15 16:20:39
(permalink)
Yep, that's per-project. Intuitively seems like it should be global to me, but easy to add to a template.
http://johntatlockaudio.com/Self-build PC // 16GB RAM // i7 3770k @ 3.5 Ghz // Nofan 0dB cooler // ASUS P8-Z77 V Pro motherboard // Intel x-25m SSD System Drive // Seagate RAID Array Audio Drive // Windows 10 64 bit // Sonar Platinum (64 bit) // Sonar VS-700 // M-Audio Keystation Pro 88 // KRK RP-6 Monitors // and a bunch of other stuff
|